Intel Agilex® 7 LVDS SERDES User Guide: M-Series

ID 768615
Date 12/04/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.3.4.1. Aligning Word Boundaries

After initializing the LVDS SERDES IP in DPA or non-DPA mode, perform these steps to align the word boundaries.
  1. Assert the rx_bitslip_reset port for at least one parallel clock cycle, and then deassert the rx_bitslip_reset port.
  2. Begin word alignment by applying pulses as required to the rx_bitslip_ctrl port.

After the word boundaries are established on each channel, the interface is ready for operation.