Networking Interface for Open Programmable Acceleration Engine: Intel® Programmable Acceleration Card with Intel® Arria® 10 GX FPGA
2.2.1.7. Unused 10GbE Channels
The 4x10GBASE-SR HSSI PHY mode supports one to four 10GbE channels. AFUs that implement less than four channels should terminate the unused channels by statically driving the hssi input ports listed in the below table to the levels shown.
hssi Port Name on Unused Channel “n” (n = 0,1,2,3) |
Port Termination Value |
---|---|
a2f_tx_analogreset[n] |
1’b1 |
a2f_tx_digitalreset[n] |
1’b1 |
a2f_rx_analogreset[n] |
1’b1 |
a2f_rx_digitalreset[n] |
1’b1 |
a2f_rx_seriallpbken[n] |
1’b1 |
a2f_rx_set_locktodata[n] |
1’b0 |
a2f_rx_set_locktoref[n] |
1’b0 |
a2f_tx_enh_data_valid[n] |
1’b0 |
a2f_rx_enh_fifo_rd_en[n] |
1’b0 |
a2f_tx_parallel_data[(n*128) +:128] |
{128{1’b0}} |
a2f_tx_control[(n*18) +:18] |
{18{1’b0}} |