Visible to Intel only — GUID: bir1697540536903
Ixiasoft
Visible to Intel only — GUID: bir1697540536903
Ixiasoft
24.4. Defective Pixel Correction IP Registers
In the software API the register names appear with a prefix of INTEL_VVP, INTEL_VVP_CORE or INTEL_VVP_DPC as appropriate and with an optional REG suffix
Address | Register | Access | Description | |
---|---|---|---|---|
Lite 74 | Full | |||
Parameterization registers | ||||
0x0000 | VID_PID | RO | N/A | Read this register to retrieve the ID of the Defective Pixel Correction IP. This register always returns 0x6FA7_0175. |
0x0004 | VERSION | RO | N/A | Read this register for the IP version information. |
0x0008 | LITE_MODE | RO | N/A | Read this register to determine if Lite mode is on. This register always returns 1. |
0x000c | DEBUG_ENABLED | RO | N/A | Read this register to determine if Debug features are on. This register returns 0 for off and 1 for on. |
0x0010 | BPS_IN | RO | N/A | Read this register to determine the bits per symbol for the input data. |
0x0014 | BPS_OUT | RO | N/A | Read this register to determine the bits per symbol for the output data. |
0x0018 | NUM_COLOR_IN | RO | N/A | Read this register to determine the number of color planes for the input data. This register always returns 1. |
0x001c | NUM_COLOR_OUT | RO | N/A | Read this register to determine the number of color planes for the output data. This register always returns 1. |
0x0020 | PIP | RO | N/A | Read this register to determine the number of pixels in parallel. |
0x0024 | MAX_WIDTH | RO | N/A | Read this register to determine the maximum supported input field width. |
0x0028 | MAX_HEIGHT | RO | N/A | Read this register to determine the maximum supported input field height. |
0x002c to 0x011F | - | - | - | Reserved |
Control, debug, and statistics registers | ||||
0x0120 | IMG_INFO_WIDTH | RW | N/A | The expected width of the incoming video fields. |
0x0124 | IMG_INFO_HEIGHT | RW | N/A | The expected height of the incoming video fields. |
0x0128 to 0x013F | - | - | - | Reserved |
0x0140 | STATUS | RO | N/A | Read this register for information about the IP status. |
0x0144 | FRAME_STATS | RO | N/A | Read this register for some frame statistics. |
0x0148 | PIX_LO_COUNTER | RO | N/A | For the selected parallel pixel pipeline, read this register for the current count of pixels that have been clipped to the low value set via the sensitivity setting. |
0x014c | PIX_HI_COUNTER | RO | N/A | For the selected parallel pixel pipeline, read this register for the current count of pixels that have been clipped to the high value set via the sensitivity setting. |
0x0150 | - | - | - | Reserved |
0x0154 | CONTROL | RW | N/A | Control bits and fields of Defective Pixel Correction IP |
0x0158 to 0x01FF | - | - | - | Reserved |
Regsiter Bit Descriptions
Name | Bits | Description |
Reserved | 31:3 | Reserved. |
Stats are Frozen | 2 | IP sets this bit to indicate it stopped updating the frame statistics and low and high pixel counters. |
Reserved | 1 | Reserved. |
Running | 0 | When 1, the IP is processing data. |
Name | Bits | Description |
---|---|---|
Reserved | 31:8 | Reserved.. |
Checksum | 7:0 | A simple checksum of the frame. |
Name | Bits | Description |
---|---|---|
Freeze Stats Request | 31 | Allows atomic access across all statistics registers. When set, the IP updates the frame statistics and low and high pixel counters at the next frame boundary. Raise stats are frozen flag in the status register. The statistics remain unchanged until this bit is cleared. |
Reserved | 30:9 | Write 0. |
PIP clip counter selection | 8:6 | Specifies which pixels in parallel pipelines the IP maps to the low and high pixel counters. |
Clip counter reset | 5 | Set to reset high and low clip counters across all pixels in parallel pipelines. Clear to enable counters. |
Sensitivity level | 4:3 | Specifies how strong the correction factor is:
|
Color filter array phase. | 2:1 | Specifies 2x2 color filter order starting from the top left corner of the image.00 01 10 11 RG GR GB BG GB BG RG GR |
Bypass | 0 | Set to bypass the Defective Pixel Correction IP. When set, the IP passes the input image unmodified. |