F-Tile Triple-Speed Ethernet Intel® FPGA IP User Guide

ID 741328
Date 4/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.2.3.6. Collision Detection

A collision happens when non-idle frames are received from the PHY and transmitted to the PHY simultaneously. Collisions can be detected only in SGMII and half-duplex mode.

When a collision happens, the collision detection state machine drives the mii_rx_col and led_col signals to 1. You can use the led_col signal as a visual check using a board LED.