Intel® Quartus® Prime Pro Edition User Guide: Power Analysis and Optimization

ID 683174
Date 10/04/2021

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

1.5.3. Multiple Simulation Power Analysis Flow

You can perform multiple simulations of an entire design or specific modules of a design. For example, in the process of verifying the top-level design, you can have three different simulation testbenches: one for normal operation, and two for corner cases. Each of these simulations produces a separate .vcd. In this case, apply the different .vcd file names to the same top-level entity, as shown in the following table.

Table 5.  Multiple Simulation File Names and Entities
File Name Entity
normal.vcd Top
corner1.vcd Top
corner2.vcd Top

The resulting power analysis uses an arithmetic average of the signal activities calculated from each simulation file to obtain the final signal activities used. If a signal err_out has a toggle rate of zero transition per second in normal.vcd, 50 transitions per second in corner1.vcd, and 70 transitions per second in corner2.vcd, the final toggle rate in the power analysis is 40 transitions per second.

If you do not want the Power Analyzer to read information from multiple instances and take an arithmetic average of the signal activities, use a .vcd that includes only signals from the instance that you care about.

Did you find the information on this page useful?

Characters remaining:

Feedback Message