Visible to Intel only — GUID: grf1548751151888
Ixiasoft
1. Intel Agilex® 7 FPGA M-Series Clocking and PLL Overview
2. M-Series Clocking and PLL Architecture and Features
3. M-Series Clocking and PLL Design Considerations
4. Clock Control Intel® FPGA IP Core
5. IOPLL Intel® FPGA IP Core
6. Intel Agilex 7 Clocking and PLL User Guide: M-Series Archives
7. Document Revision History for the Intel Agilex® 7 Clocking and PLL User Guide: M-Series
2.2.1. PLL Features
2.2.2. PLL Usage
2.2.3. PLL Locations
2.2.4. PLL Architecture
2.2.5. PLL Control Signals
2.2.6. PLL Feedback Modes
2.2.7. Clock Multiplication and Division
2.2.8. Programmable Phase Shift
2.2.9. Programmable Duty Cycle
2.2.10. PLL Cascading
2.2.11. PLL Input Clock Switchover
2.2.12. PLL Reconfiguration and Dynamic Phase Shift
2.2.13. PLL Calibration
3.1. Guidelines: Clock Switchover
3.2. Guidelines: Timing Closure
3.3. Guidelines: Resetting the PLL
3.4. Guidelines: Configuration Constraints
3.5. Clocking Constraints
3.6. IP Core Constraints
3.7. Guideline: Achieving 5% Duty Cycle for fOUT_EXT ≥ 300 MHz Using tx_outclk Port from LVDS SERDES Intel® FPGA IP
Visible to Intel only — GUID: grf1548751151888
Ixiasoft
4.3. Clock Control IP Core Ports and Signals
Port Name | Description |
---|---|
inclk | Input signal to the clock network. |
inclk0x, inclk1x, inclk2x, inclk3x | Input signals to the clock network based on the value selected for the Number of Clock Inputs parameter. |
clkselect[] | Input that dynamically selects the clock source to drive the clock network that is driven by the clock buffer. Input port [1 DOWNTO 0] wide. The following list shows the signal selection for the clkselect[] value:
|
outclk | Output of the Clock Control IP core when Clock Divider option is not selected. |
ena | Clock enable of the clock gate block. This signal is active-high. |
clock_div1x, clock_div2x, clock_div4x | Outputs of the Clock Control IP core when the Clock Divider option is selected. The exact combination of ports exposed depends on the value specified for the Clock Divider Output Ports parameter.
|