Visible to Intel only — GUID: sed1548728809363
Ixiasoft
1. Intel Agilex® 7 FPGA M-Series Clocking and PLL Overview
2. M-Series Clocking and PLL Architecture and Features
3. M-Series Clocking and PLL Design Considerations
4. Clock Control Intel® FPGA IP Core
5. IOPLL Intel® FPGA IP Core
6. Intel Agilex 7 Clocking and PLL User Guide: M-Series Archives
7. Document Revision History for the Intel Agilex® 7 Clocking and PLL User Guide: M-Series
2.2.1. PLL Features
2.2.2. PLL Usage
2.2.3. PLL Locations
2.2.4. PLL Architecture
2.2.5. PLL Control Signals
2.2.6. PLL Feedback Modes
2.2.7. Clock Multiplication and Division
2.2.8. Programmable Phase Shift
2.2.9. Programmable Duty Cycle
2.2.10. PLL Cascading
2.2.11. PLL Input Clock Switchover
2.2.12. PLL Reconfiguration and Dynamic Phase Shift
2.2.13. PLL Calibration
3.1. Guidelines: Clock Switchover
3.2. Guidelines: Timing Closure
3.3. Guidelines: Resetting the PLL
3.4. Guidelines: Configuration Constraints
3.5. Clocking Constraints
3.6. IP Core Constraints
3.7. Guideline: Achieving 5% Duty Cycle for fOUT_EXT ≥ 300 MHz Using tx_outclk Port from LVDS SERDES Intel® FPGA IP
Visible to Intel only — GUID: sed1548728809363
Ixiasoft
2.1.1. Clock Network Architecture
Each M-Series device is divided into a number of evenly sized clock sectors.
Figure 1. Clock Sector Floorplan for M-Series DevicesThis figure shows an example of the clock sectors in an M-Series device, which is implemented as an array of sectors—5 rows and 6 columns in this example. I/O banks are at the top and bottom of the M-Series device.