Multi Channel DMA Intel® FPGA IP for PCI Express User Guide

ID 683821
Date 4/11/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.4.1. Endpoint MSI Support through BAS

MSI enables a device Function to request service by writing a system-specified data value to a system-specified address using a single dword Memory Write transaction. System software initializes the message address and message data (referred to as the “vector”) during device configuration, allocating one or more vectors to each MSI-capable Function.

When you enable MSI Capability in Endpoint BAS or BAM+BAS mode, the IP core exposes MSI request interface to user logic. When user issues an MSI request through this interface, internal Interrupt Controller receives inputs such as function number and MSI number from user logic and generates AVMM Write to the BAS module as shown in the figure below. The BAS receives MSI signaling from interrupt controller and generating an MSI.

Figure 9. MSI Interrupt
Note: Endpoint MSI Interrupt is only available for MCDMA P-Tile IP and MCDMA F-Tile IP.

Did you find the information on this page useful?

Characters remaining:

Feedback Message