DisplayPort IP User Guide

ID 683273
Date 7/15/2025
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.4.1. Simulating with the ModelSim Simulator

To simulate using the Siemens EDA ModelSim* simulator, perform the following steps:

  1. Start the ModelSim* simulator.
  2. In ModelSim* , change directory to the project simulation directory <variation>_sim/mentor.
  3. Type the following commands to set up the required libraries and compile the generated simulation model:

    do msim_setup.tcl

    ld

    run -all