GTS AXI Streaming Intel® FPGA IP for PCI Express* Design Example User Guide

Download PDF
ID 817713
Date 5/09/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the GTS AXI Streaming Intel® FPGA IP for PCI Express* Design Example 2. Quick Start Guide 3. Document Revision History for the GTS AXI Streaming Intel® FPGA IP for PCI Express* Design Example User Guide
1. About the GTS AXI Streaming Intel® FPGA IP for PCI Express* Design Example x
1.1. Programmed Input/Output Design Example 1.2. Programmed Input/Output Design Example Functional Description
1.2. Programmed Input/Output Design Example Functional Description x
1.2.1. GTS AXI Streaming IP—Design Under Test (DUT) 1.2.2. PIO Application 1.2.3. On-Chip Memory (MEM) 1.2.4. GTS System PLL Clocks Intel® FPGA IP 1.2.5. GTS Reset Sequencer Intel® FPGA IP 1.2.6. Reset Release Intel® FPGA IP
1.2.2. PIO Application x
1.2.2.1. Scheduler 1.2.2.2. Read Write Module 1.2.2.3. Avalon® Memory-Mapped Interface 1.2.2.4. Completion Module 1.2.2.5. Width Adapter 1.2.2.6. TX Credit Initialization 1.2.2.7. AXI to Avalon® Streaming Interface Adapter
2. Quick Start Guide x
2.1. Directory Structure 2.2. Generating the Design Example 2.3. Simulating the Design Example 2.4. Design Example Simulation Testbench 2.5. Compiling the Design Example
2.3. Simulating the Design Example x
2.3.1. Steps to Run Simulation using VCS* Working Directory Instructions 2.3.2. Steps to Run Simulation using VCS* MX 2.3.3. Steps to Run Simulation using QuestaSim*
2.3.1. Steps to Run Simulation using VCS* x
Working Directory Instructions 2.3.1.1. Running VCS* Simulation in Interactive Mode
2.3.2. Steps to Run Simulation using VCS* MX x
2.3.2.1. Running VCS* MX Simulation in Interactive Mode
2.4. Design Example Simulation Testbench x
2.4.1. Test Driver Module 2.4.2. PIO Design Example Testbench
1. About the GTS AXI Streaming Intel® FPGA IP for PCI Express* Design Example
2. Quick Start Guide
3. Document Revision History for the GTS AXI Streaming Intel® FPGA IP for PCI Express* Design Example User Guide

2.3.1. Steps to Run Simulation using VCS*

Working Directory

<example_design>/pcie_ed_tb/pcie_ed_tb/sim/synopsys/vcs/

Instructions

  1. Run the following commands:
    Table 2.   VCS* Simulation Commands
    Note: The commands below are single-line commands.
    Mode Command
    FASTSIM 
    sh vcs_setup.sh USER_DEFINED_COMPILE_OPTIONS="" 
USER_DEFINED_ELAB_OPTIONS="+define+IP7521SERDES_UX_SIMSPEED\ " 
USER_DEFINED_SIM_OPTIONS="" | tee simulation.log
    non-FASTSIM 
    sh vcs_setup.sh USER_DEFINED_COMPILE_OPTIONS=""
USER_DEFINED_ELAB_OPTIONS=" "
USER_DEFINED_SIM_OPTIONS="" | tee simulation.log
  2. A successful simulation ends with the following message in the simulation.log file that is generated.
    "Simulation stopped due to successful completion!"

Section Content
Running VCS Simulation in Interactive Mode

Level Two Title