F-Tile Triple-Speed Ethernet Intel® FPGA IP User Guide

ID 741328
Date 2/09/2023

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.2.5. RGMII Transmit

On transmit, all data transfers are synchronous to both edges of tx_clk. The RGMII control signal tx_control is asserted to indicate the start of a new frame and remains asserted until the last upper nibble of the frame is present on the rgmii_out[3:0] bus. Between frames, tx_control remains deasserted.
Figure 63. RGMII Transmit in 10/100 Mbps

Figure 64. RGMII Transmit in Gigabit Mode

If a frame is received on the Avalon® streaming interface with an error (ff_tx_err asserted with ff_tx_eop), the frame is subsequently transmitted with the RGMII tx_control error signal (at the falling edge of tx_clk) at any time during the frame transfer.

Figure 65. RGMII Transmit with Error in 1000 Mbps