F-Tile Triple-Speed Ethernet Intel® FPGA IP User Guide

ID 741328
Date 2/09/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.2.6. RGMII Receive

On receive all signals are sampled on both edges of rx_clk. The RGMII control signal rx_control is asserted by the PHY to indicate the start of a new frame and remains asserted until the last upper nibble of the frame is present on rgmii_in[3:0] bus. Between frames, rx_control remains deasserted.
Figure 66. RGMII Receive in 10/100 Mbps


Figure 67. RGMII Receive in 1000 Mbps


A frame received on the RGMII interface with a PHY error indication is subsequently transferred on the Avalon® streaming interface with the error signal rx_err[0] asserted.

Figure 68. RGMII Receive with Error in Gigabit Mode


The current implementation of the RGMII receive interface expects a positive-delay rx_clk relative to the receive data (the clock comes after the data).