Arria® 10 SoC Boot User Guide

ID 683735
Date 4/03/2019
Document Table of Contents
Give Feedback

1.8.5. Compiling the UEFI Source Code with the ARM Tool Chain

This section explains how to compile the UEFI source code with the ARM tool chain.

  1. Open a terminal window and enter the following command:
    $ cd /data/<username>/pggit/uefi-socfpga
    $ make clean
    Note: make clean deletes your entire /data/<username>/pggit/uefi-socfpga/Build/ folder and also cleans the BaseTools.
  2. Compile the UEFI boot loader.
    $ make DEVICE=a10 COMPILER=gcc HANDOFF_DTB=a10_soc_devkit_ghrd_qspi/software/bootloader/devicetree.dtb