1.1. Software and Hardware Requirements
1.2. Download and Install the Tutorial Design Files
1.3. Open the Tutorial Project
1.4. Creating Qsys Systems
1.5. Assemble a Hierarchical System
1.6. Viewing the Memory Tester System in Qsys
1.7. Compiling and Downloading Software to a Development Board
1.8. Debugging Your Design
1.9. Verifying Hardware in System Console
1.10. Simulating Custom Components
1.11. View a Diagram of the Completed System
1.4.1.1. Create a New Qsys System and Set up the Clock Source
1.4.1.2. Add a Pipeline Bridge
1.4.1.3. Add a Custom Pattern Generator
1.4.1.4. Add a PRBS Pattern Generator
1.4.1.5. Add a Two-to-One Streaming Multiplexer
1.4.1.6. Verify the Memory Address Map
1.4.1.7. Connect the Reset Signals
1.4.1.8. Save the System
1.4.2.1. Create a New Qsys System and Set Up the Clock Soource
1.4.2.2. Add a Pipeline Bridge
1.4.2.3. Add a Custom Pattern Checker
1.4.2.4. Add the PRBS Pattern Checker
1.4.2.5. Add a One-to-Two Streaming Demultiplexer
1.4.2.6. Verify the Memory Address Map
1.4.2.7. Connect the Reset Signals
1.4.2.8. Save the System
1.9.1. Open the Tutorial Project
You can use completed design files in the tt_qsys_design\quartus_ii_projects_for_boards\<development_board> directory.
- Open the Quartus II project in the project directory for your development board type.
- In Qsys, open top_system.qsys in the project directory for your development board type.