GTS Dynamic Reconfiguration Controller IP User Guide: Agilex™ 5 FPGAs and SoCs

Download PDF
ID 849710
Date 4/18/2025
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Overview 2. Quick Start Guide 3. Configuring and Generating the IP 4. Integrating the GTS Dynamic Reconfiguration Controller IP With Your Application 5. Designing with the IP Core 6. Designing the IP Solution 7. Sharing Clocking and Applying SDC Constraints 8. Runtime Flow 9. Simulating the IP 10. Validating the IP 11. Appendix A: Functional Description 12. Registers 13. Document Revision History for the GTS Dynamic Reconfiguration Controller IP User Guide
1. Overview x
1.1. About the GTS Dynamic Reconfiguration Controller IP 1.2. About the Document 1.3. Key Concepts 1.4. System Level Block Diagram 1.5. Design Checklist 1.6. IP Design Flow 1.7. Dynamic Reconfiguration 1.8. Design Considerations 1.9. Design Migration Guidelines 1.10. Design Flow Requirements
1.1. About the GTS Dynamic Reconfiguration Controller IP x
1.1.1. Release Information 1.1.2. Features 1.1.3. High-Level Functional Overview 1.1.4. Licensing the IP 1.1.5. Device Family Support 1.1.6. Device Speed Grade Support 1.1.7. IP Performance and Resource Utilization
1.2. About the Document x
1.2.1. Target Audience 1.2.2. Conventions Used in the Document 1.2.3. Terminology 1.2.4. Acronyms 1.2.5. Reference Documents and Training 1.2.6. GTS Dynamic Reconfiguration Target Applications
2. Quick Start Guide x
2.1. Steps to Generate and Run the Design Example 2.2. Steps to Create a Custom Dynamic Reconfiguration Design
2.1. Steps to Generate and Run the Design Example x
2.1.1. Generating the Design Example 2.1.2. Compiling the Design Example 2.1.3. Simulating the Design Example 2.1.4. Validating the Design Example
2.2. Steps to Create a Custom Dynamic Reconfiguration Design x
2.2.1. Simulating the Custom Design 2.2.2. Validating the Custom Design
3. Configuring and Generating the IP x
3.1. Configuring the Quartus® Prime Pro Edition Project 3.2. Generating Dynamic Reconfiguration Design and Configuration Profiles 3.3. Generating HDL for Synthesis and Simulation 3.4. Using the Dynamic Reconfiguration Assignment Editor 3.5. Generating HSSI Dynamic Reconfiguration IP 3.6. Generating the Design Example 3.7. Compiling the Design Example
3.2. Generating Dynamic Reconfiguration Design and Configuration Profiles x
3.2.1. Configuring the IP
3.2.1. Configuring the IP x
3.2.1.1. Configuring the IP Presets 3.2.1.2. Configuring the IP Parameters
3.4. Using the Dynamic Reconfiguration Assignment Editor x
3.4.1. Quartus User Flow
3.4.1. Quartus User Flow x
3.4.1.1. IP List 3.4.1.2. Dynamic Reconfiguration Group List 3.4.1.3. Properties 3.4.1.4. DR Group Visualization Pane 3.4.1.5. Messages Pane
3.6. Generating the Design Example x
3.6.1. Generated Directory Structure and Files
4. Integrating the GTS Dynamic Reconfiguration Controller IP With Your Application x
4.1. High-Level Interface Types 4.2. Dependent/Supporting IPs 4.3. Implementing Required Clocking 4.4. Implementing Required Resets 4.5. Implementing Required AVMM Interface 4.6. Control and Status Interface 4.7. Implementing Mux Selector Interface 4.8. Implementing SRC Interface 4.9. Implementing Local AVMM Interface 4.10. Connecting the Interfaces 4.11. Signal Functions 4.12. Integrating the IP With User Logic 4.13. Integrating the IP With Your Board 4.14. Integrating the IP on the Stack With a Software Driver
5. Designing with the IP Core x
5.1. Release Constraints 5.2. DR Design Guidelines
6. Designing the IP Solution x
6.1. Dynamic Reconfiguration QSF Settings 6.2. Defining DR Combinations 6.3. Instantiating the Generated DR Group 6.4. Generating and Instantiating the DR Controller
9. Simulating the IP x
9.1. Design Example Features 9.2. Simulating the GTS PMA/FEC Direct PHY Intel FPGA IP Example Design Testbench
9.2. Simulating the GTS PMA/FEC Direct PHY Intel FPGA IP Example Design Testbench x
9.2.1. Simulating the Design Example
9.2.1. Simulating the Design Example x
9.2.1.1. Simulating the Testbench Flow 9.2.1.2. Verifying the Simulation Results
10. Validating the IP x
10.1. List of Switches on the Developer Kit 10.2. Testing the Hardware Design Example 10.3. Troubleshooting and Debugging Issues
10.2. Testing the Hardware Design Example x
10.2.1. Configure the Clocks in Hardware 10.2.2. Program the FPGA 10.2.3. Running the Hardware Test
11. Appendix A: Functional Description x
11.1. AVMM Clock Crossing Bridge 11.2. AVMM Decoder 11.3. Mux Sel, Local AVMM, and SRC Interface 11.4. Dynamic Reconfiguration CSR
12. Registers x
12.1. Configuration Registers 12.2. GTS Transceiver PHY Registers
12.1. Configuration Registers x
12.1.1. Register Next ID Configuration 0 12.1.2. Register Next ID Configuration 1 12.1.3. Register Next ID Configuration 2 12.1.4. Register Next ID Configuration 3 12.1.5. Register Next ID Configuration 4 12.1.6. Register Next ID Configuration 5 12.1.7. Register Next ID Configuration 6 12.1.8. Register Next ID Configuration 7 12.1.9. Register Next ID Configuration 8 12.1.10. Register Next ID Configuration 9 12.1.11. Register Next ID Configuration 10 12.1.12. Register Next ID Configuration 11 12.1.13. Register Next ID Configuration 12 12.1.14. Register Next ID Configuration 13 12.1.15. Register Next ID Configuration 14 12.1.16. Register Next ID Configuration 15 12.1.17. Register Next ID Configuration 16 12.1.18. Register Next ID Configuration 17 12.1.19. Register Next ID Configuration 18 12.1.20. Register Next ID Configuration 19 12.1.21. Register Trigger 12.1.22. Register Trigger Status 12.1.23. Register Error Configuration 12.1.24. Register Error Status
1. Overview
2. Quick Start Guide
3. Configuring and Generating the IP
4. Integrating the GTS Dynamic Reconfiguration Controller IP With Your Application
5. Designing with the IP Core
6. Designing the IP Solution
7. Sharing Clocking and Applying SDC Constraints
8. Runtime Flow
9. Simulating the IP
10. Validating the IP
11. Appendix A: Functional Description
12. Registers
13. Document Revision History for the GTS Dynamic Reconfiguration Controller IP User Guide

3.2. Generating Dynamic Reconfiguration Design and Configuration Profiles

You configure the Dynamic Reconfiguration Controller IP along with a respective protocol IP through the appropriate IP graphical user interface (GUI) settings. Based on the IP settings, RTL connections in the design, and the required QSF settings, the Quartus® Prime software generates the required programming file sets. The generated programming file sets include the connection information and the MIF file.
To generate a dynamic reconfiguration design, follow these steps:
  1. In the Quartus® Prime IP Catalog, locate the GTS Dynamic Reconfiguration Controller IP. For detailed instructions, refer to the Configuring the IP section.
  2. Configure the dynamic reconfiguration controller IP parameters. Refer to Configuring the IP Parameters for instructions on how to configure the IP.
  3. Generate the Dynamic Reconfiguration Controller IP.
  4. If your design requires multiple protocol IPs, locate the protocol IPs in the Quartus® Prime IP catalog. For more details, refer to the Supported IPs table.
  5. Instantiate the protocol IP(s) and a Dynamic Reconfiguration Controller IP in your RTL. For RTL connections examples, refer to the design examples generated per the GTS Dynamic Reconfiguration Design Example section.
    Note: Each GTS Dynamic Reconfiguration Controller IP only supports a single Dynamic Reconfiguration group.
  6. Enter the dynamic reconfiguration controller IP specific .qsf settings such as the dynamic reconfiguration combinations, IP name, IP direction, width, relative offset reconfiguration ID, combination ID, and others. For more information on these settings, refer to GTS Dynamic Reconfiguration QSF Settings. Use the DR Assignment Editor to generate the appropriate .qsf settings.
  7. To create qsf assignments consisting of discrete IPs, you can use the DR Assignment Editor. To open the DR Assignment Editor: Go to Quartus® Prime Menu > Assignments > Dynamic Reconfiguration (DR) Assignment Editor.
  8. The GTS Dynamic Reconfiguration Controller IP in the Quartus® Prime software uses the .qsf settings from the DR Assignment Editor. It is recommended to use the DR Assignment Editor tool to create .qsf settings, as manually creating .qsf settings could lead to human error and cause the GUI tool to crash.
  9. Once your project compiles, the Quartus® Prime software generates a new top project file and other collaterals required by your design, including a MIF file containing the delta programming sequences.

Section Content
Configuring the IP

Level Two Title