GTS Dynamic Reconfiguration Controller IP User Guide: Agilex™ 5 FPGAs and SoCs

Download PDF
ID 849710
Date 4/18/2025
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Overview 2. Quick Start Guide 3. Configuring and Generating the IP 4. Integrating the GTS Dynamic Reconfiguration Controller IP With Your Application 5. Designing with the IP Core 6. Designing the IP Solution 7. Sharing Clocking and Applying SDC Constraints 8. Runtime Flow 9. Simulating the IP 10. Validating the IP 11. Appendix A: Functional Description 12. Registers 13. Document Revision History for the GTS Dynamic Reconfiguration Controller IP User Guide
1. Overview x
1.1. About the GTS Dynamic Reconfiguration Controller IP 1.2. About the Document 1.3. Key Concepts 1.4. System Level Block Diagram 1.5. Design Checklist 1.6. IP Design Flow 1.7. Dynamic Reconfiguration 1.8. Design Considerations 1.9. Design Migration Guidelines 1.10. Design Flow Requirements
1.1. About the GTS Dynamic Reconfiguration Controller IP x
1.1.1. Release Information 1.1.2. Features 1.1.3. High-Level Functional Overview 1.1.4. Licensing the IP 1.1.5. Device Family Support 1.1.6. Device Speed Grade Support 1.1.7. IP Performance and Resource Utilization
1.2. About the Document x
1.2.1. Target Audience 1.2.2. Conventions Used in the Document 1.2.3. Terminology 1.2.4. Acronyms 1.2.5. Reference Documents and Training 1.2.6. GTS Dynamic Reconfiguration Target Applications
2. Quick Start Guide x
2.1. Steps to Generate and Run the Design Example 2.2. Steps to Create a Custom Dynamic Reconfiguration Design
2.1. Steps to Generate and Run the Design Example x
2.1.1. Generating the Design Example 2.1.2. Compiling the Design Example 2.1.3. Simulating the Design Example 2.1.4. Validating the Design Example
2.2. Steps to Create a Custom Dynamic Reconfiguration Design x
2.2.1. Simulating the Custom Design 2.2.2. Validating the Custom Design
3. Configuring and Generating the IP x
3.1. Configuring the Quartus® Prime Pro Edition Project 3.2. Generating Dynamic Reconfiguration Design and Configuration Profiles 3.3. Generating HDL for Synthesis and Simulation 3.4. Using the Dynamic Reconfiguration Assignment Editor 3.5. Generating HSSI Dynamic Reconfiguration IP 3.6. Generating the Design Example 3.7. Compiling the Design Example
3.2. Generating Dynamic Reconfiguration Design and Configuration Profiles x
3.2.1. Configuring the IP
3.2.1. Configuring the IP x
3.2.1.1. Configuring the IP Presets 3.2.1.2. Configuring the IP Parameters
3.4. Using the Dynamic Reconfiguration Assignment Editor x
3.4.1. Quartus User Flow
3.4.1. Quartus User Flow x
3.4.1.1. IP List 3.4.1.2. Dynamic Reconfiguration Group List 3.4.1.3. Properties 3.4.1.4. DR Group Visualization Pane 3.4.1.5. Messages Pane
3.6. Generating the Design Example x
3.6.1. Generated Directory Structure and Files
4. Integrating the GTS Dynamic Reconfiguration Controller IP With Your Application x
4.1. High-Level Interface Types 4.2. Dependent/Supporting IPs 4.3. Implementing Required Clocking 4.4. Implementing Required Resets 4.5. Implementing Required AVMM Interface 4.6. Control and Status Interface 4.7. Implementing Mux Selector Interface 4.8. Implementing SRC Interface 4.9. Implementing Local AVMM Interface 4.10. Connecting the Interfaces 4.11. Signal Functions 4.12. Integrating the IP With User Logic 4.13. Integrating the IP With Your Board 4.14. Integrating the IP on the Stack With a Software Driver
5. Designing with the IP Core x
5.1. Release Constraints 5.2. DR Design Guidelines
6. Designing the IP Solution x
6.1. Dynamic Reconfiguration QSF Settings 6.2. Defining DR Combinations 6.3. Instantiating the Generated DR Group 6.4. Generating and Instantiating the DR Controller
9. Simulating the IP x
9.1. Design Example Features 9.2. Simulating the GTS PMA/FEC Direct PHY Intel FPGA IP Example Design Testbench
9.2. Simulating the GTS PMA/FEC Direct PHY Intel FPGA IP Example Design Testbench x
9.2.1. Simulating the Design Example
9.2.1. Simulating the Design Example x
9.2.1.1. Simulating the Testbench Flow 9.2.1.2. Verifying the Simulation Results
10. Validating the IP x
10.1. List of Switches on the Developer Kit 10.2. Testing the Hardware Design Example 10.3. Troubleshooting and Debugging Issues
10.2. Testing the Hardware Design Example x
10.2.1. Configure the Clocks in Hardware 10.2.2. Program the FPGA 10.2.3. Running the Hardware Test
11. Appendix A: Functional Description x
11.1. AVMM Clock Crossing Bridge 11.2. AVMM Decoder 11.3. Mux Sel, Local AVMM, and SRC Interface 11.4. Dynamic Reconfiguration CSR
12. Registers x
12.1. Configuration Registers 12.2. GTS Transceiver PHY Registers
12.1. Configuration Registers x
12.1.1. Register Next ID Configuration 0 12.1.2. Register Next ID Configuration 1 12.1.3. Register Next ID Configuration 2 12.1.4. Register Next ID Configuration 3 12.1.5. Register Next ID Configuration 4 12.1.6. Register Next ID Configuration 5 12.1.7. Register Next ID Configuration 6 12.1.8. Register Next ID Configuration 7 12.1.9. Register Next ID Configuration 8 12.1.10. Register Next ID Configuration 9 12.1.11. Register Next ID Configuration 10 12.1.12. Register Next ID Configuration 11 12.1.13. Register Next ID Configuration 12 12.1.14. Register Next ID Configuration 13 12.1.15. Register Next ID Configuration 14 12.1.16. Register Next ID Configuration 15 12.1.17. Register Next ID Configuration 16 12.1.18. Register Next ID Configuration 17 12.1.19. Register Next ID Configuration 18 12.1.20. Register Next ID Configuration 19 12.1.21. Register Trigger 12.1.22. Register Trigger Status 12.1.23. Register Error Configuration 12.1.24. Register Error Status
1. Overview
2. Quick Start Guide
3. Configuring and Generating the IP
4. Integrating the GTS Dynamic Reconfiguration Controller IP With Your Application
5. Designing with the IP Core
6. Designing the IP Solution
7. Sharing Clocking and Applying SDC Constraints
8. Runtime Flow
9. Simulating the IP
10. Validating the IP
11. Appendix A: Functional Description
12. Registers
13. Document Revision History for the GTS Dynamic Reconfiguration Controller IP User Guide

6.3. Instantiating the Generated DR Group

  • For synthesis, add this file to the Quartus® Prime project:

    support_logic/<DR Group>/synth/<DR Group>.sv

  • For simulation, add this file to the simulation file list:

    support_logic/<DR Group>/sim/<DR Group>.sv

  • Based on the example above, the generated files include:

    support_logic/dr_top/synth/dr_top.sv

    support_logic/dr_top/sim/dr_top.sv

    This file contains a module named <DR Group> (e.g., dr_top in the example) with the following pinout, where N is the number of transceiver channels in the group, banks indicates the number of 4-channel banks spanned by the group, and profiles denotes the number of IP variants instantiated.

The following table lists the ports instantiated with each DR Group:
Table 25.  Ports Instantiated with each DR group
Port Name Direction Description
*_<ip variant instance name> Refer to the Supported IPs table. Top-level pins from each variant instance are exposed with the variant name as a suffix.

Refer to the pin i_reset on ip_variant_1_inst as i_reset_ip_variant_1_inst. You can connect these pins to user logic in the same way as driving the IP directly, but ensure that signals such as datapath and sampling clocks are shared between variants on the same channel.

tx_serial_data_n_ch<N>

o_tx_serial_data_p_ch<N>

Output Shared TX serial pins for channel N

Example: o_tx_serial_data_p_ch0

i_rx_serial_data_n_ch<N>

i_rx_serial_data_p_ch<N>

Input

Shared RX serial pins for channel N

Example: i_rx_serial_data_p_ch0

i_pma_cu_clk_<bank> Input Connect to o_pma_cu_clk on the Reset Sequencer IP.
o_rs_request_ch<N> Output Connect to i_src_rs_req[N] on the Reset Sequencer IP.
i_rs_grant_ch<N> Input Connect to o_src_rs_grant[N] on the Reset Sequencer IP.
one_hot_sel[profiles-1:0] Input Connect to o_one_hot_sel on the DR Controller IP
o_src_pause_grant_ch<N> Output Connect toi_src_pause_grant[N] on the DR Controller IP.
i_src_pause_request_ch<N Input Connect to o_src_pause_request[N] on the DR Controller IP.
i_dr_lavmm_clk_ch<N> Input Connect to same clock as i_csr_clk on the DR Controller IP.
i_dr_lavmm_addr_ch<N>[20:0] Input Connect to o_ch<N>_lavmm_addr on the DR Controller IP.
i_dr_lavmm_be_ch<N>[3:0] Input Connect to o_ch<N>_lavmm_be on the DR Controller IP.
i_dr_lavmm_read_ch<N> Input Connect to o_ch<N>_lavmm_read on the DR Controller IP.
i_dr_lavmm_wdata_ch<N>[31:0] Input Connect to o_ch<N>_lavmm_wdata on the DR Controller IP.
i_dr_lavmm_write_ch<N> Input Connect to o_ch<N>_lavmm_write on the DR Controller IP.
o_dr_lavmm_rdata_ch<N>[31:0] Output Connect to i_ch<N>_lavmm_rdata on the DR Controller IP.
o_dr_lavmm_rdata_valid_ch<N> Output Connect to i_ch<N>_lavmm_rdata_valid on the DR Controller IP.
o_dr_lavmm_waitreq_ch<N> Output Connect to i_ch<N>_lavmm_waitreq on the DR Controller IP
i_dr_lavmm_rstn_ch<N> Input Connect to o_ch<N>_lavmm_rstn on the DR Controller IP.
i_system_pll_clk Input Use the set_instance_assignment -name command to create a DR_SHARED_ shared clock signal.

Connect to o_syspll_c0 on System PLL IP.

Level Two Title