Agilex™ 3 FPGAs and SoCs Device Data Sheet

ID 848370
Date 8/11/2025
Public
Document Table of Contents

GTS Transceiver Power Supply Operating Conditions

Table 12.   Agilex™ 3 FPGAs GTS Transceiver Power Supply Operating Conditions For specification status, see the Data Sheet Status table
Symbol Description Speed Grade Typical DC Level (V) Recommended VR Accuracy (% of Typical DC Level) Recommended VR Ripple (% of Typical DC level) Recommended AC Transient (% of Typical DC level) Maximum (VR Accuracy + Ripple + AC Transient) (% of Typical DC Level)27 Unit
VCC_HSSI_L1 Transceiver, system PLL, and hard IP digital power supply –6S 0.78 ±0.5 ±2.5 ±3 V
–7S 0.75 ±0.5 ±2.5 ±3 V
VCCEHT_GTSL1A 28 Transceiver PMA, transceiver PLL, and transceiver reference clock high voltage analog power supply 1.8 ±0.5 ±2.0 ±2.5 V
VCCERT_GTSL1A Transceiver PMA and transceiver reference clock low voltage analog power supply 1 ±0.5 ±2.0 ±2.5 V
27 For scope measurement, 20 MHz bandwidth is sufficient. During measurement, put the ground pin as close to the power rail pin as possible.
28 HF noise requires AC 30 mVpp above 1 MHz.