LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices

Download PDF
ID 683520
Date 9/20/2022
Public
Document Table of Contents
Document Table of Contents x
LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices
LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices x
Release Information LVDS SERDES Intel® FPGA IP Features LVDS SERDES IP Core Functional Modes LVDS SERDES IP Core Functional Description LVDS SERDES IP Initialization and Reset LVDS SERDES Intel® FPGA IP Signals LVDS SERDES Intel® FPGA IP Parameter Settings LVDS SERDES Intel® FPGA IP Timing LVDS SERDES Intel® FPGA IP Design Examples Additional LVDS SERDES IP Core References LVDS SERDES Intel® FPGA IP User Guide Archives Document Revision History for LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices
LVDS SERDES IP Core Functional Description x
Serializer DPA FIFO Bitslip Deserializer
LVDS SERDES IP Initialization and Reset x
Initializing the LVDS SERDES IP in Non-DPA Mode Initializing the LVDS SERDES IP in DPA Mode Resetting the DPA Word Boundaries Alignment
Word Boundaries Alignment x
Aligning Word Boundaries
LVDS SERDES Intel® FPGA IP Parameter Settings x
LVDS SERDES Intel® FPGA IP General Settings LVDS SERDES Intel® FPGA IP PLL Settings LVDS SERDES Intel® FPGA IP Receiver Settings LVDS SERDES Intel® FPGA IP Transmitter Settings LVDS SERDES IP Core Clock Resource Summary
LVDS SERDES Intel® FPGA IP Receiver Settings x
Receiver Input Clock Parameters Setup
LVDS SERDES Intel® FPGA IP Transmitter Settings x
Setting the Transmitter Output Clock Parameters
LVDS SERDES Intel® FPGA IP Timing x
I/O Timing Analysis FPGA Timing Analysis Timing Analysis when Using PLL Core Clocks Timing Closure Guidelines for Internal FPGA Paths
I/O Timing Analysis x
Obtaining RSKM Report Obtaining TCCS Report
LVDS SERDES Intel® FPGA IP Design Examples x
LVDS SERDES IP Synthesizable Intel® Quartus® Prime Design Examples LVDS SERDES IP Simulation Design Example Combined LVDS SERDES IP Transmitter and Receiver Design Example LVDS SERDES IP Dynamic Phase Shift Design Example
Additional LVDS SERDES IP Core References x
IP Migration Flow for Arria® V, Cyclone® V, and Stratix® V Devices LVDS Interface with External PLL Mode LVDS Transmitters and Receivers in the Same I/O Bank Comparison of LVDS SERDES IP Core with Stratix® V SERDES
IP Migration Flow for Arria® V, Cyclone® V, and Stratix® V Devices x
Migrating Your ALTLVDS_TX and ALTLVDS_RX IP Cores
LVDS Interface with External PLL Mode x
IOPLL IP Signal Interface with LVDS SERDES IP IOPLL Parameter Values for External PLL Mode Connection between IOPLL IP and LVDS SERDES IP in External PLL Mode
LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices

Migrating Your ALTLVDS_TX and ALTLVDS_RX IP Cores

To migrate your ALTLVDS_TX and ALTLVDS_RX IP cores to the LVDS SERDES Intel® FPGA IP, follow these steps:

  1. Open your ALTLVDS_TX or ALTLVDS_RX core in the IP parameter editor.
  2. In the Currently selected device family, select Arria 10 or Cyclone 10 GX.
  3. Click Finish to open the LVDS SERDES IP core parameter editor. The parameter editor configures the LVDS SERDES IP core settings similar to the ALTLVDS_TX or ALTLVDS_RX IP core settings.
  4. If there are any incompatible settings between the two IP cores, select new supported settings.
  5. Click Finish to regenerate the IP core.
  6. Replace your ALTLVDS_TX or ALTLVDS_RX IP core instantiation in RTL with the LVDS SERDES IP core.
Note: The LVDS SERDES IP core port names may not match the ALTLVDS_TX or ALTLVDS_RX IP core port names. Therefore, simply changing the IP core name in the instantiation may not be sufficient.
Level Two Title