LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices

Download PDF
ID 683520
Date 9/20/2022
Public
Document Table of Contents
Document Table of Contents x
LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices
LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices x
Release Information LVDS SERDES Intel® FPGA IP Features LVDS SERDES IP Core Functional Modes LVDS SERDES IP Core Functional Description LVDS SERDES IP Initialization and Reset LVDS SERDES Intel® FPGA IP Signals LVDS SERDES Intel® FPGA IP Parameter Settings LVDS SERDES Intel® FPGA IP Timing LVDS SERDES Intel® FPGA IP Design Examples Additional LVDS SERDES IP Core References LVDS SERDES Intel® FPGA IP User Guide Archives Document Revision History for LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices
LVDS SERDES IP Core Functional Description x
Serializer DPA FIFO Bitslip Deserializer
LVDS SERDES IP Initialization and Reset x
Initializing the LVDS SERDES IP in Non-DPA Mode Initializing the LVDS SERDES IP in DPA Mode Resetting the DPA Word Boundaries Alignment
Word Boundaries Alignment x
Aligning Word Boundaries
LVDS SERDES Intel® FPGA IP Parameter Settings x
LVDS SERDES Intel® FPGA IP General Settings LVDS SERDES Intel® FPGA IP PLL Settings LVDS SERDES Intel® FPGA IP Receiver Settings LVDS SERDES Intel® FPGA IP Transmitter Settings LVDS SERDES IP Core Clock Resource Summary
LVDS SERDES Intel® FPGA IP Receiver Settings x
Receiver Input Clock Parameters Setup
LVDS SERDES Intel® FPGA IP Transmitter Settings x
Setting the Transmitter Output Clock Parameters
LVDS SERDES Intel® FPGA IP Timing x
I/O Timing Analysis FPGA Timing Analysis Timing Analysis when Using PLL Core Clocks Timing Closure Guidelines for Internal FPGA Paths
I/O Timing Analysis x
Obtaining RSKM Report Obtaining TCCS Report
LVDS SERDES Intel® FPGA IP Design Examples x
LVDS SERDES IP Synthesizable Intel® Quartus® Prime Design Examples LVDS SERDES IP Simulation Design Example Combined LVDS SERDES IP Transmitter and Receiver Design Example LVDS SERDES IP Dynamic Phase Shift Design Example
Additional LVDS SERDES IP Core References x
IP Migration Flow for Arria® V, Cyclone® V, and Stratix® V Devices LVDS Interface with External PLL Mode LVDS Transmitters and Receivers in the Same I/O Bank Comparison of LVDS SERDES IP Core with Stratix® V SERDES
IP Migration Flow for Arria® V, Cyclone® V, and Stratix® V Devices x
Migrating Your ALTLVDS_TX and ALTLVDS_RX IP Cores
LVDS Interface with External PLL Mode x
IOPLL IP Signal Interface with LVDS SERDES IP IOPLL Parameter Values for External PLL Mode Connection between IOPLL IP and LVDS SERDES IP in External PLL Mode
LVDS SERDES Intel® FPGA IP User Guide: Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices

LVDS Transmitters and Receivers in the Same I/O Bank

If you want to place both LVDS transmitter and receiver interfaces in the same I/O bank, you can use the LVDS SERDES IP core with an external PLL.
  • To use an external PLL, in the LVDS SERDES IP parameter editor, turn on the Use external PLL option.
  • You can generate two instances of the LVDS SERDES IP—a receiver and a transmitter.
  • In each instance, you can use up to the following number of channels:
    • 71 transmitters
    • 23 DPA or non-DPA receivers
    • 12 soft-CDR receivers
  • Connect the same PLL to both the transmitter and receiver instances.
Figure 22. LVDS Interface with the IOPLL IP (Non-DPA Mode)This figure shows the connections you need to make between the IOPLL IP and the LVDS SERDES IP in external PLL mode if you are using non-DPA mode.


Figure 23. LVDS Interface with the IOPLL IP (DPA Mode)This figure shows the connections you need to make between the IOPLL IP and the LVDS SERDES IP in external PLL mode if you are using DPA. Invert the locked output port and connect it to the pll_areset port.


Figure 24. LVDS Interface with the IOPLL IP (Soft-CDR Mode)This figure shows the connections you need to make between the IOPLL IP and the LVDS SERDES IP core if you are using soft-CDR mode. Invert the locked output port and connect it to the pll_areset port.


Level Two Title