Multi Channel DMA for PCI Express* Intel® FPGA IP Design Example User Guide

Download PDF
ID 683517
Date 9/15/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Terms and Acronyms 2. Design Example Detailed Description 3. Design Example Quick Start Guide 4. Multi Channel DMA for FPGA IP Design Example User Guide Archives 5. Document Revision History for the Multi Channel DMA for FPGA IP Design Example User Guide
2. Design Example Detailed Description x
2.1. Design Example Overview 2.2. Hardware and Software Requirements 2.3. PIO Using MCDMA Bypass Mode 2.4. Avalon-ST Packet Generate/Check 2.5. Avalon-ST Device-side Packet Loopback 2.6. Avalon-MM DMA
2.3. PIO Using MCDMA Bypass Mode x
2.3.1. Avalon-ST PIO Using MCDMA Bypass Mode 2.3.2. Avalon-MM PIO Using MCDMA Bypass mode
2.3.1. Avalon-ST PIO Using MCDMA Bypass Mode x
2.3.1.1. Four-Port Avalon-ST PIO Using MCDMA Bypass Mode 2.3.1.2. Single-Port Avalon-ST PIO Using MCDMA Bypass Mode
2.3.1.1. Four-Port Avalon-ST PIO Using MCDMA Bypass Mode x
2.3.1.1.1. Simulation Result 2.3.1.1.2. Hardware Test Result
2.3.2. Avalon-MM PIO Using MCDMA Bypass mode x
2.3.2.1. Simulation Results 2.3.2.2. Hardware Test Results
2.4. Avalon-ST Packet Generate/Check x
2.4.1. Four-Port Avalon-ST Packet Generate/Check 2.4.2. Single-Port Avalon-ST Packet Generate/Check
2.4.1. Four-Port Avalon-ST Packet Generate/Check x
2.4.1.1. Simulation Results 2.4.1.2. Hardware Test Results
2.4.2. Single-Port Avalon-ST Packet Generate/Check x
2.4.2.1. Simulation Waveforms 2.4.2.2. Simulation Log
2.5. Avalon-ST Device-side Packet Loopback x
2.5.1. Simulation Results 2.5.2. Hardware Test Results
2.6. Avalon-MM DMA x
2.6.1. Simulation Results 2.6.2. Hardware Test Results
3. Design Example Quick Start Guide x
3.1. Design Example Directory Structure 3.2. Generating the Example Design using Intel® Quartus® Prime 3.3. Simulating the Design Example 3.4. Compiling the Example Design in Intel® Quartus® Prime 3.5. Running the Design Example Application on a Hardware Setup
3.2. Generating the Example Design using Intel® Quartus® Prime x
3.2.1. Procedure
3.3. Simulating the Design Example x
3.3.1. Testbench Overview 3.3.2. Example Testbench Flow for DMA Test with Avalon-ST Packet Generate/Check Design Example 3.3.3. Run the Simulation Script 3.3.4. View the Results
3.5. Running the Design Example Application on a Hardware Setup x
3.5.1. Program the FPGA 3.5.2. Quick Start Guide
3.5.2. Quick Start Guide x
3.5.2.1. Software Test Setup 3.5.2.2. Driver Support 3.5.2.3. MCDMA Custom Driver 3.5.2.4. MCDMA DPDK Poll Mode Driver 3.5.2.5. MCDMA Kernel Mode Driver
3.5.2.3. MCDMA Custom Driver x
3.5.2.3.1. Prerequisites 3.5.2.3.2. Software Setup 3.5.2.3.3. Run the Reference Example Application
3.5.2.3.1. Prerequisites x
3.5.2.3.1.1. Configuration Changes from BIOS 3.5.2.3.1.2. External Packages 3.5.2.3.1.3. Set the Boot Parameters
3.5.2.3.2. Software Setup x
3.5.2.3.2.1. Installing the Linux Kernel Driver and Enabling VFs 3.5.2.3.2.2. Build and Install User Space Library 3.5.2.3.2.3. Create Guest VM by Using QEMU 3.5.2.3.2.4. Establish Communication Between Host and QEMU
3.5.2.3.3. Run the Reference Example Application x
3.5.2.3.3.1. Meta Data Test 3.5.2.3.3.2. BAM Test 3.5.2.3.3.3. Packet Gen Test
3.5.2.4. MCDMA DPDK Poll Mode Driver x
3.5.2.4.1. Prerequisites 3.5.2.4.2. Install PMD and Test Application 3.5.2.4.3. Run the Reference Example Application
3.5.2.4.1. Prerequisites x
3.5.2.4.1.1. Set the Boot Parameters 3.5.2.4.1.2. Configuration Changes from BIOS 3.5.2.4.1.3. Install and Build Testpmd
3.5.2.4.2. Install PMD and Test Application x
3.5.2.4.2.1. Create VM Environment
3.5.2.5. MCDMA Kernel Mode Driver x
3.5.2.5.1. Prerequisites 3.5.2.5.2. Software Setup 3.5.2.5.3. Examples
3.5.2.5.1. Prerequisites x
3.5.2.5.1.1. Host Configuration 3.5.2.5.1.2. Set the Boot Parameters
3.5.2.5.2. Software Setup x
3.5.2.5.2.1. Build and Install Kernel Driver 3.5.2.5.2.2. Build and Install Libmcmem 3.5.2.5.2.3. Build Testapp 3.5.2.5.2.4. Configure Kernel Driver 3.5.2.5.2.5. Configure Libmcmem 3.5.2.5.2.6. Configure Testapp
1. Terms and Acronyms
2. Design Example Detailed Description
3. Design Example Quick Start Guide
4. Multi Channel DMA for FPGA IP Design Example User Guide Archives
5. Document Revision History for the Multi Channel DMA for FPGA IP Design Example User Guide

3.3.3. Run the Simulation Script

Figure 37. Simulation Script
  1. Change to the testbench simulation directory, pcie_ed_tb/pcie_ed_tb/sim/<simulators> .
  2. Run the simulation script for the simulator of your choice. Refer to the table below.
  3. Analyze the results.
Table 5.  Steps to run the simulation
Simulator Simulation Directory Instructions
ModelSim

<example_design>/pcie_ed_tb/ pcie_ed _tb/sim/mentor/

  1. Invoke vsim (by typing vsim, which brings up a console window where you can run the following commands).
  2. do msim_setup.tcl
    Note: Alternatively, instead of doing Steps 1 and 2, you can type: vsim -c -do msim_setup.tcl
  3. ld_debug
  4. run -all
  5. A successful simulation ends with the following message: "Simulation stopped due to successful completion!"
Note: ModelSim currently supports BAM and PIO example designs only.
VCS

<example_design> /pcie_ed_tb/ pcie_ed _tb/sim/synopsys/vcs 

  1. sh vcs_setup.sh 
USER_DEFINED_COMPILE_OPTIONS="" 
USER_DEFINED_ELAB_OPTIONS="-xlrm\ uniq_prior_final" 
USER_DEFINED_SIM_OPTIONS=""
  2. A successful simulation ends with the following message: "Simulation stopped due to successful completion!"
Xcelium
Note: CISE to confirm if Xcelium simulator supports all example design variants.

<example_design>/pcie_ed_tb/pcie_ed_tb/sim/xcelium 

  1. sh xcelium_setup.sh 
USER_DEFINED_SIM_OPTIONS="" 
USER_DEFINED_ELAB_OPTIONS ="-timescale\ 1ns/1ps\ -NOWARN\ CSINFI"
  2. A successful simulation ends with the following message: "Simulation stopped due to successful completion!"
Level Two Title