Multi Channel DMA for PCI Express* Intel® FPGA IP Design Example User Guide

ID 683517
Date 9/15/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.3.2. Avalon-MM PIO Using MCDMA Bypass mode

Figure 6. Avalon-MM PIO using MCDMA Bypass mode

This design example enables Avalon-MM PIO master which bypasses the DMA path. The Avalon-MM PIO master allows application to perform single, non-bursting register read/write operation with on-chip memory.

This design example only supports PIO functionality and does not perform DMA operations (similar to the design examples in Avalon-ST PIO Using MCDMA Bypass Mode). Hence, the Avalon-MM DMA ports are not connected.

The design example includes the Multi Channel DMA for PCI Express IP Core with the parameters you specified and other supporting components:
  • resetIP – Reset Release IP that holds the Multi Channel DMA in reset until the entire FPGA fabric enters user mode.
  • MEM_PIO – On-chip memory for the PIO operation. Connected to the MCDMA Avalon-MM PIO Master (rx_pio_master) port that is mapped to PCIe BAR2.
Transfer mode option supported in test application software (perfq_app) command line:
  • PIO test: -o

For a description of which driver(s) to use with this design example, refer to Driver Support.

Did you find the information on this page useful?

Characters remaining:

Feedback Message