Vision Processing with the Canny Edge Detection Reference Design
ID
683433
Date
2/14/2015
Public
1.1. About Canny Edge Detection
1.2. About the Canny Edge Detection Reference Design
1.3. Getting Started with the Canny Edge Reference Design
1.4. Canny Edge Detection Reference Design Block Description
1.5. Stream-to-Memory Conversion
1.6. Latency and Throughput
1.7. Canny Edge Reference Design Resource Usage
1.3.1. Hardware and Software Requirements
1.3.2. Connecting the Hardware to Use the Canny Edge Reference Design
1.3.3. Loading the Canny Edge Reference Design FPGA Image with the SD Card Image
1.3.4. Canny Edge Reference Design Initial Startup Problems
1.3.5. Controlling the FPGA Flow of the Canny Edge Reference Design
1.3.6. Capturing the Pixel Stream
1.3.7. Programming the FPGA with the Canny Edge Reference Design
1.3.8. Initializing the ARM Processor
1.3.5. Controlling the FPGA Flow of the Canny Edge Reference Design
Use the System Console in the Quartus® II software to control the flow.
- Open System console.
- Run the gui_thres_res.tcl script.
The drop down menu selects the type of video data to be passed into the ARM.Note: Select the first drop down menu item if running the edge_linking algorithm.