Intel® Quartus® Prime Pro Edition User Guide: Scripting

ID 683432
Date 12/13/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.1.18.5. device_run_test_idle (::quartus::jtag)

The following table displays information for the device_run_test_idle Tcl command:

Tcl Package and Version

Belongs to ::quartus::jtag

Syntax device_run_test_idle [-h | -help] [-long_help] [-num_clocks <state cycle count> ]
Arguments -h | -help Short help
-long_help Long help with examples and possible return values
-num_clocks <state cycle count> The number of times the Run_Test_Idle state is cycled through. If not specified, this value is 1
Description
Drive the JTAG controller into the Run_Test_Idle state
for a number cycles specified with the -num_clocks
option.

The device must be locked before you can perform this
operation.
Example Usage
# List all available programming hardware, and select the USB-Blaster.
# (Note: this example assumes only one USB-Blaster is connected.)
puts "Programming Hardware:"
foreach hardware_name [get_hardware_names] {
	puts $hardware_name
	if { [string match "USB-Blaster*" $hardware_name] } {
		set usbblaster_name $hardware_name
	}
}
puts "\nSelect JTAG chain connected to $usbblaster_name.\n";

# List all devices on the chain, and select the first device on the chain.
puts "\nDevices on the JTAG chain:"
foreach device_name [get_device_names -hardware_name $usbblaster_name] {
	puts $device_name
	if { [string match "@1*" $device_name] } {
		set test_device $device_name
	}
}
puts "\nSelect device: $test_device.\n";

# Open device 
open_device -hardware_name $usbblaster_name -device_name $test_device

# Retrieve device id code.
# IDCODE instruction value is 6; The ID code is 32 bits long.

# IR and DR shift should be locked together to ensure that other applications 
# will not change the instruction register before the id code value is shifted
# out while the instruction register is still holding the IDCODE instruction.
device_lock -timeout 10000
device_ir_shift -ir_value 6 -no_captured_ir_value
puts "IDCODE: 0x[device_dr_shift -length 32 -value_in_hex]"

# Goto the Run_Test_Idle state and stay there for 8 cycles.
device_run_test_idle -num_clocks 8
device_unlock

# Close device
close_device
Return Value Code Name Code String Return
TCL_OK 0 INFO: Operation successful
TCL_ERROR 1 ERROR: A device has not been locked; exclusive communication must be obtained first.
TCL_ERROR 1 ERROR: A device has been locked by another application; exclusive communication cannot be granted within the specified timeout period.

Did you find the information on this page useful?

Characters remaining:

Feedback Message