SDI II Intel® FPGA IP User Guide

ID 683133
Date 10/08/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.2.3. Parameterizing the IP Core

To parameterize the SDI II IP core, follow these steps:

  1. Select the video standard.
  2. Select Bidirectional, Transmitter, or Receiver interface direction.
  3. Select Combined Transceiver and Protocol, Separate Transceiver or Separate Protocol, (for Arria V, Cyclone V, and Stratix V devices only).
  4. Turn on the necessary transceiver options (for Arria V, Cyclone V, and Stratix V devices only).
  5. Turn on the necessary receiver options.
    Some options may be grayed out, because they are not supported in the currently selected configuration.
  6. Turn on the necessary transmitter options.
    Some options may be grayed out, because they are not supported in the currently selected configuration.
  7. Select the necessary options in the Design Example tab, (if you are generating the design example for Intel® Arria® 10, Intel® Cyclone® 10 GX, and Intel® Stratix® 10 devices).
  8. Click Finish.

Did you find the information on this page useful?

Characters remaining:

Feedback Message