Intel® Thunderbolt™ 3 and 4 DCH Driver for Windows® 10 and Window 11* for Intel® NUC 12 Compute Element ELM12HB[x]

736380
6/29/2022

Introduction

Provides Intel® Thunderbolt™ 3 and 4 DCH Driver for Intel® NUC 12 Compute Element ELM12HB.

Available Downloads

  • Windows 11*, Windows 10, 64-bit*
  • Size: 33.3 MB
  • SHA1: FA44DD7F0DF742ED38B8C735D2E8835707BB634C

Detailed Description

Purpose

Installs the DCH-compliant Thunderbolt™ bus driver for Intel® NUC 12 Compute Element ELM12HB products with Thunderbolt using Windows® 10 and Windows 11*. This driver is required if you plan to connect Thunderbolt devices.

What are DCH drivers? Click here for more information.

How to install

Double-click Thunderbolt™ Software Installer.exe.

Note

If the driver won't install and you are using a supported operating system, try one or both of the following:

  • Plug a Thunderbolt device into the Intel NUC and run the installer again.
  • Uninstall the current driver, then run the installer again.

The Thunderbolt Control Center should load automatically after the driver is installed and if or when you're connected to the Internet. If it doesn't, you can download it from this link: Thunderbolt Control Center software (available on the Microsoft Store)

The Thunderbolt Control Center allows you to approve and manage Thunderbolt devices.

Some IT departments might have a group policy that prevents you from downloading apps from the Windows Store. They can choose to set up a private store with approved apps. See the following for more information:

Supported Operating Systems

  • Microsoft Windows 10-64 - October 2018 Update 1809 (RS5) or later
  • Microsoft Windows 11*