Intel® Server Board S2600ST Family BIOS and Firmware Update for Intel® One Boot Flash Update (Intel® OFU) Utility

19139
12/28/2023

Introduction

As of 17 February 2024, no functional, security, or other updates will be provided for Intel® Server Board S2600ST Family BIOS and Firmware Update Packages. Intel® Server Board S2600ST Family BIOS and Firmware Update Packages will no longer be available after 29 March 2032. All versions are provided as is. Intel recommends that users of Intel® Server Board S2600ST Family BIOS and Firmware discontinue use as soon as possible. Intel® Server Board S2600ST Family BIOS and firmware update for Intel® One Boot Flash Update (Intel® OFU) Utility. read firmware dependencies in the requirements section.

Available Downloads

  • Size: 48.2 MB
  • SHA256: 422E69CF58286CA78E4653544DD632C98E558DA687DEAB9197C73B05B651EB8B

Detailed Description

System firmware requirements

 

To update the system firmware stack to the versions included in this updated package, the currently loaded system firmware stack on the system must meet the following:

 

  System BIOS  - R02.01.0016 or later

  ME Firmware  - 04.01.04.804 or later

  BMC Firmware - 2.88.71773d70 or later

  FRUSDR       - 1.83 or later 

 

Failure to get to the required firmware stack may cause unexpected results.

 

About this release:

 

  System BIOS  - R02.01.0017

  ME Firmware  - 04.01.05.002

  BMC Firmware - 2.88.e172ff67

  FRUSDR       - 1.83

 

Support platforms and dependency

 

Processors supported: 1st and 2nd Generation Intel(R) Xeon(R) Processor Scalable families

 

Microcode versions:

 

           CPUID           Version          Status

        0x50654        0x02006c0a     (1st Generation Intel(R) Xeon(R) Scalable H0,M0,U0)

        0x50656        0x0400320a     (2nd Generation Intel(R) Xeon(R) Scalable B0,L0,R0)

        0x50657        0x0500320a     (2nd Generation Intel(R) Xeon(R) Scalable B1,L1,R1)

 

 

Important note

 

  • Windows : When startup.bat is executed from SFUP, the update order is CPLD, PMEM, BMC, FRUSDR and BIOS followed by a system reset.
  • Linux : When "sh startup.sh" is executed from SFUP, it uninstalls existing OFU (if any) and installs latest OFU from SFUP. The update order is CPLD, PMEM, BMC, FRUSDR and BIOS followed by a system reset.

 

Refer to the Release Notes file for a complete list of known issues, workarounds, and detailed requirements.

This download is valid for the product(s) listed below.

Disclaimers1

Product and Performance Information

1

Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.