MIPI CSI-2 Intel® FPGA IP User Guide

Download PDF
ID 813926
Date 4/26/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the MIPI CSI-2 Intel® FPGA IP 2. MIPI CSI-2 Intel® FPGA IP Interface Overview 3. MIPI CSI-2 Intel® FPGA IP Parameters 4. Designing with the MIPI CSI-2 Intel® FPGA IP 5. MIPI CSI-2 Intel® FPGA IP Block Descriptions 6. Registers 7. Document Revision History for MIPI CSI-2 Intel® FPGA IP User Guide
1. About the MIPI CSI-2 Intel® FPGA IP x
1.1. MIPI CSI-2 Intel® FPGA IP Features 1.2. Device Family Support for MIPI CSI-2 Intel® FPGA IP 1.3. Recommended Speed Grades 1.4. MIPI CSI-2 Intel® FPGA IP Performance and Resource Utilization 1.5. Release Information for MIPI CSI-2 Intel® FPGA IP
2. MIPI CSI-2 Intel® FPGA IP Interface Overview x
2.1. MIPI CSI-2 Intel® FPGA IP Clocks 2.2. MIPI CSI-2 Intel® FPGA IP Resets 2.3. MIPI CSI-2 Intel® FPGA IP User Interfaces
2.3. MIPI CSI-2 Intel® FPGA IP User Interfaces x
2.3.1. Receiver PHY Protocol Interface (PPI) Signals 2.3.2. Avalon® Memory-Mapped Interface Control Interface Signals 2.3.3. Receiver AXI4-Streaming Output Video Interface Signals 2.3.4. Receiver AXI4-Stream Output Passthrough Interface 2.3.5. Transmitter PHY-Protocol Interface (PPI) Signals 2.3.6. Transmitter AXI4-Stream Input Video Interface Signals 2.3.7. Transmitter AXI4-Stream Input Passthrough Interface
4. Designing with the MIPI CSI-2 Intel® FPGA IP x
4.1. Generating the MIPI CSI-2 Intel® FPGA IP 4.2. MIPI CSI-2 Intel® FPGA IP Generation Output Quartus® Prime Pro Edition 4.3. MIPI CSI-2 Intel® FPGA IP Systems Integration and Implementation
4.2. MIPI CSI-2 Intel® FPGA IP Generation Output Quartus® Prime Pro Edition x
4.2.1. Files Generated for Intel® FPGA IP Cores and Platform Designer Systems
4.3. MIPI CSI-2 Intel® FPGA IP Systems Integration and Implementation x
4.3.1. D-PHY PHY Protocol Interface (PPI) Clock Frequencies 4.3.2. MIPI CSI-2 Receiver Clock Requirements 4.3.3. MIPI CSI-2 Transmitter Clock Requirements 4.3.4. Required Supporting IP 4.3.5. Limitations and Known Issues
5. MIPI CSI-2 Intel® FPGA IP Block Descriptions x
5.1. MIPI CSI-2 Receiver 5.2. MIPI CSI-2 Transmitter
6. Registers x
6.1. CSI-2 Receiver Register Map 6.2. CSI-2 Transmitter Register Map
1. About the MIPI CSI-2 Intel® FPGA IP
2. MIPI CSI-2 Intel® FPGA IP Interface Overview
3. MIPI CSI-2 Intel® FPGA IP Parameters
4. Designing with the MIPI CSI-2 Intel® FPGA IP
5. MIPI CSI-2 Intel® FPGA IP Block Descriptions
6. Registers
7. Document Revision History for MIPI CSI-2 Intel® FPGA IP User Guide

2.3.1. Receiver PHY Protocol Interface (PPI) Signals

The interface between the MIPI CSI-2 Intel® FPGA IP and the Intel MIPI D-PHY IP uses the PHY-Protocol Interface defined in the MIPI D-PHY and CSI-2 standards. This carries the received MIPI data stream to be decoded by the CSI-2 Receiver.
Table 8.  Receiver PHY Protocol Interface (PPI) Signals
Signal Width Direction Description
Clock Lane High Speed Receive<ppi_width>=16
rx_data_width_hs_ck 2 Output Refer to MIPI D-PHY specification version 2.5: Figure 95 and 97, 101 High Speed Receive on Slave Side, 8/16-bit Bus, LP Mode.
rx_data_hs_ck ppi_width Input
rx_valid_hs_ck ppi_width/8 Input
rx_active_hs_ck 1 Input
rx_sync_hs_ck 1 Input
rx_clk_active_hs_ck 1 Input Refer to MIPI D-PHY specification version 2.5: Figure 90, Example High Speed Clock Enable, LP Mode. Figure 121 High Speed Transmission and Reception with HS-Idle Function.
rx_skew_cal_hs_ck 1 Input Calibration. Implementation-specific how the system responds to this condition. Refer to MIPI D-PHY specification version 2.5: Figure 119. Skew Calibration, LP Mode.
rx_alternate_cal_hs_ck 1 Input
rx_error_cal_hs_ck 1 Input
Data Lane High Speed Receive<lane>=0-7; <ppi_width>=16
rx_srst_n_d<lane> 1 Input Synchronous reset from Intel MIPI RX D-PHY.
rx_word_clk_hs_ d<lane> 1 Input Refer to MIPI D-PHY specification version 2.5: Figure 95 and 97, 101 High Speed Receive on Slave Side, 8/16-bit Bus, LP Mode.
rx_data_width_hs_ d<lane> 2 Output
rx_data_hs_ d<lane> ppi_width Input
rx_valid_hs_ d<lane> ppi_width/8 Input
rx_active_hs_ d<lane> 1 Input
rx_sync_hs_ d<lane> 1 Input
rx_clk_active_hs_ d<lane> 1 Input Refer to MIPI D-PHY specification version 2.5: Figure 90 Example High Speed Clock Enable, LP Mode. Figure 125 High Speed Transmission and Reception with HS-Idle Function.
rx_skew_cal_hs_ d<lane> 1 Input Calibration. Implementation-specific how the system responds to this condition. Refer to MIPI D-PHY specification version 2.5: Figure 119. Skew Calibration, LP Mode.
rx_alternate_cal_hs_ d<lane> 1 Input
rx_error_cal_hs_ d<lane> 1 Input
ClockLane Escape Mode Receive (LPDT = CCI Control Data Transmission, ULPS = Sleep Mode)
rx_clk_esc_ck 1 Input For low power data transmission (LPDT). Required for USL control data communication. Refer to MIPI D-PHY specification version 2.5: Figure 107 Example Low-Power Data Reception, LP Mode.
rx_lpdt_esc_ck 1 Input
rx_data_esc_ck 8 Input
rx_valid_esc_ck 1 Input
rx_trigger_esc_ck 4 Input For LPDT. Any bit received after a Trigger Command (i.e., Reset Trigger) and before the Lines go to the Stop state shall be ignored. Refer to MIPI D-PHY specification version 2.5: Figure 110-112.
rx_ulps_esc_ck 1 Input For ULPS and used with ulps_active_not_ck. Refer to MIPI D-PHY specification version 2.5: Figure 116 Example Data Lane ULPS Entry and Exit, LP Mode.
DataLane Escape Mode Receive (LPDT = CCI Control Data Transmission, ULPS = Sleep Mode). <lane>=0-7
rx_clk_esc_d<lane> 1 Input For LPDT. Required for USL control data communication. Refer to MIPI D-PHY specification version 2.5: Figure 107 Example Low-Power Data Reception, LP Mode.
rx_lpdt_esc_d<lane> 1 Input
rx_data_esc_d<lane> 8 Input
rx_valid_esc_d<lane> 1 Input
rx_trigger_esc_d<lane> 4 Input For LPDT. Any bit received after a Trigger Command (i.e., Reset Trigger) and before the Lines go to the Stop state shall be ignored. Refer to MIPI D-PHY specification version 2.5: Figure 110-112.
rx_ulps_esc_d<lane> 1 Input For ULPS and used with ulps_active_not_ck. Refer to MIPI D-PHY specification version 2.5: Figure 116 Example Data Lane ULPS Entry and Exit, LP Mode.
Clock Lane Control
direction_ck 1 Input

Indicates the current direction of Lane.

0 = Transmit mode.

1 = Receive mode.
force_rx_mode_ck 1 Output

For Transmit:

Refer to MIPI D-PHY specification version 2.5: Figure 86. Master PHY Enable, LP Mode.

For Receive:

Refer to MIPI D-PHY specification version 2.5: Figure 88. Example Slave PHY Enable, LP Mode.

force_tx_stop_mode_ck 1 Output
stop_state_ck 1 Input
enable_ck 1 Output
alp_mode_ck 1 Output

Alternate Low Power Mode Selection.

0 = LP mode.

1 = ALP mode.
tx_ulps_clk_ck 1 Output Refer to MIPI D-PHY specification version2.5: Figure 114. Example Clock Lane ULPS Entry and Exit, LP Mode.
rx_ulps_clk_not_ck 1 Input
ulps_active_not_ck 1 Input
tx_hsidle_clk_hs_ck 1 Output Refer to MIPI D-PHY specification version 2.5: Figure 121. HS Transmission and Reception with HS-IDLE Function.
tx_hsidle_clk_ready_hs_ck 1 Input
Data Lane Control<lane>=0-7
direction_d<lane> 1 Input

Indicates the current direction of Lane.

0 = Transmit mode.

1 = Receive mode.
force_rx_mode_d<lane> 1 Output

For Transmit:

Refer to MIPI D-PHY specification version 2.5: Figure 86. Master PHY Enable, LP Mode.

For Receive:

Refer to MIPI D-PHY specification version 2.5: Figure 88. Example Slave PHY Enable, LP Mode.

force_tx_stop_mode_d<lane> 1 Output
stop_state_d<lane> 1 Input
enable_d<lane> 1 Output
alp_mode_d<lane> 1 Output

Alternate Low Power Mode Selection.

0 = LP mode.

1 = ALP mode.
tx_ulps_clk_d<lane> 1 Output Refer to D-PHY specification version 2.5: Figure 114. Example Clock Lane ULPS Entry and Exit, LP Mode.
rx_ulps_clk_not_d<lane> 1 Input
ulps_active_not_d<lane> 1 Input
tx_hsidle_clk_hs_d<lane> 1 Output Refer to MIPI D-PHY specification version 2.5: Figure 121. HS Transmission and Reception with HS-IDLE Function.
tx_hsidle_clk_ready_hs_d<lane> 1 Input
Clock Lane Error Input
i_err_sot_hs_ck 1 Input Start-of-Transmission (SoT) error.
i_err_sot_sync_hs 1 Input Start-of-Transmission Synchronization error.
i_err_esc_ck 1 Input Escape entry error.
i_err_sync_ck 1 Input Low-power data transmission synchronization error.
i_err_control_ck 1 Input Control error.
i_err_contention_lp0_ck 1 Input LP0 Contention error.
i_err_contention_lp1_ck 1 Input LP1 Contention error.
Data Lane Error Input<lane>=0-7
i_err_sot_hs_d<lane> 1 Input Start-of-Transmission error.
i_err_sot_sync_d<lane> 1 Input Start-of-Transmission Synchronization error.
i_err_esc_d<lane> 1 Input Escape entry error.
i_err_sync_d<lane> 1 Input Low-power data transmission synchronization error.
i_err_control_d<lane> 1 Input Control error.
i_err_contention_lp0_d<lane> 1 Input LP0 Contention error.
i_err_contention_lp1_d<lane> 1 Input LP1 Contention error.
Clock Lane Error Passthrough Output
o_err_sot_hs_ck 1 Input Start-of-Transmission error.
o_err_sot_sync_hs 1 Input Start-of-Transmission Synchronization error.
o_err_esc_ck 1 Input Escape entry error.
o_err_sync_ck 1 Input Low-power data transmission synchronization error.
o_err_control_ck 1 Input Control error.
o_err_contention_lp0_ck 1 Input LP0 Contention error.
o_err_contention_lp1_ck 1 Input LP1 Contention error.
Data Lane Error Passthrough Output<lane>=0-7
o_err_sot_hs_d<lane> 1 Input Start-of-Transmission error.
o_err_sot_sync_d<lane> 1 Input Start-of-Transmission Synchronization error.
o_err_esc_d<lane> 1 Input Escape entry error.
o_err_sync_d<lane> 1 Input Low-power data transmission synchronization error.
o_err_control_d<lane> 1 Input Control error.
o_err_contention_lp0_d<lane> 1 Input LP0 Contention error.
o_err_contention_lp1_d<lane> 1 Input LP1 Contention error.
Related Information
Level Two Title