High Bandwidth Memory (HBM2E) Interface Intel Agilex® 7 M-Series FPGA IP User Guide

ID 773264
Date 4/21/2023

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

A.2. Simulating HBM2E User Designs

To run the simulations with your HBM2E designs created using the Intel® Quartus® Prime software flow, you must manually add the RTL simulation registration include file (.inc) in the top-level of your design. The initiator-to-target connectivity and address mapping are not included in the netlist. If you use the Platform Designer flow to make connection between initiators and targets and generate a design, it creates the registration file (.inc) for your design. In this case, you do not need to manually add the registrations statements in the top-level of your design.
You must add one registration statement for each initiator-to-target connection, specifying the start address and the size of that connection’s address range. Refer to the Simulating the NoC Designs section in the Intel Agilex® 7 M-Series FPGA Network-on-Chip (NoC) User Guide for detailed information on how to add NoC connectivity and address mapping to the simulation net list.

The HBM2E Intel® FPGA IP design example creates simulation files with registration statements. You can refer to the registration statements included in the ed_sim.v file generated with the design example. The ed_sim.v file resides at this location: <your_directory>/hbm_fp_0_example_design/sim/ed_sim/sim/ed_sim.v

The following code fragment shows a snapshot of the registration statements for a single-channel design:

.noc_initiator_b256.iniu_0.initiator_inst_0.register_if(ed_sim.hbm_fp_0.hbm_fp_0.tniu_ch0_u0.target_0.target_inst_0.get_if() , 0, 31'h40000000);
.noc_initiator_b256.iniu_1.initiator_inst_0.register_if(ed_sim.hbm_fp_0.hbm_fp_0.tniu_ch0_u1.target_0.target_inst_0.get_if() , 0, 31'h40000000);
.noc_initiator_b256.iniu_0.initiator_inst_0.register_if(ed_sim.hbm_fp_0.hbm_fp_0.tniu_ch0_ch1_sb.target_0.target_lite_inst_0.target_inst_0.get_if() , 44'h40000000, 31'h8000000);