Visible to Intel only — GUID: xrt1652493143995
Ixiasoft
1. About the RiscFree* IDE
2. Installation and Setup
3. Getting Started with RiscFree* IDE
4. Debug Setup for Nios® V Processor System
5. Debug Setup for Arm* Hard Processor System
6. Debugging with RiscFree* IDE
7. Debugging with Command-Line Interface
8. Ashling RiscFree* Integrated Development Environment (IDE) for Intel® FPGAs User Guide Archives
9. Document Revision History for the Ashling RiscFree* Integrated Development Environment (IDE) for Intel® FPGAs User Guide
A. Appendix
6.1. Debug Features in RiscFree* IDE
6.2. Processor System Debug
6.3. Heterogeneous Multicore Debug
6.4. Debugging µC/OS-II Application
6.5. Debugging FreeRTOS Application
6.6. Debugging Zephyr Application
6.7. Arm* HPS On-Chip Trace
6.8. Debugging the Arm* Linux Kernel
6.9. Debugging Target Software in an Intel® Simics Simulator Session
Visible to Intel only — GUID: xrt1652493143995
Ixiasoft
2. Installation and Setup
RiscFree* IDE supports Nios® V processor and Arm* core debugging in multiple host operating system (OS) platforms. Refer to the Operating System Support page for the OS supported.
Note: If you install both the Intel® Quartus® Prime software and the Intel® Quartus® Prime Programmer and Tools in the same location as RiscFree* IDE, RiscFree* IDE refers to the required binaries from the Intel® Quartus® Prime software installation directory by default.
RiscFree* IDE has two types of installation options:
- Bundled installation option when installing the Intel® Quartus® Prime software
- Standalone installation which requires you to install one of the following to use the debugger:
- The Intel® Quartus® Prime Programmer and Tools
- The Intel® Quartus® Prime software
Related Information