Intel® Quartus® Prime Pro Edition User Guide: Partial Reconfiguration

ID 683834
Date 4/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.3.9.1. PR Control Block Signal Timing Diagrams

Successful PR Session ( Intel® Arria® 10 Example)

The following flow describes a successful Intel® Arria® 10 PR session:

  1. Assert PR_REQUEST and wait for PR_READY; drive PR_DATA to 0.
  2. The PR control block asserts PR_READY, asynchronous to clk.
  3. Start sending Raw Binary File (.rbf) to the PR control block, with 1 valid word per clock cycle. On .rbf file transfer completion, drive PR_DATA to 0. The PR control block asynchronously asserts PR_DONE when the control block completes the reconfiguration operation. The PR control block deasserts PR_READY on configuration completion.
  4. Deassert PR_REQUEST. The PR control block acknowledges the end of PR_REQUEST, and deasserts PR_DONE. The host can now initiate another PR session.
Figure 59. Timing Diagram for Successful Intel® Arria® 10 PR Session

Unsuccessful PR Session with Configuration Frame Readback Error ( Intel Arria 10 Example)

The following flow describes an Intel® Arria® 10 PR session with error in the EDCRC verification of a configuration frame readback:
  1. The PR control block internally detects a CRC error.
  2. The CRC control block then asserts CRC_ERROR.
  3. The PR control block asserts the PR_ERROR.
  4. The PR control block deasserts PR_READY, so that the host can withdraw the PR_REQUEST.
  5. The PR control block deasserts CRC_ERROR and clears the internal CRC_ERROR signal to get ready for a new PR session. The host can now initiate another PR session.
Figure 60. Timing Diagram for Unsuccessful Intel® Arria® 10 PR Session with Configuration Frame Readback Error

Unsuccessful PR Session with PR_ERROR ( Intel Arria 10 Example)

The following flow describes an Intel® Arria® 10 PR session with transmission error or configuration CRC error:

  1. The PR control block asserts PR_ERROR.
  2. The PR control block deasserts PR_READY, so that the host can withdraw PR_REQUEST.
  3. The PR control block deasserts PR_ERROR to get ready for a new PR session. The host can now initiate another PR session.
Figure 61. Timing Diagram for Unsuccessful Intel® Arria® 10 PR Session with PR_ERROR

Late Withdrawal PR Session ( Intel Arria 10 Example)

The following flow describes a late withdrawal Intel® Arria® 10 PR session:

  1. The PR host can withdraw the request after the PR control block asserts PR_READY.
  2. The PR control block deasserts PR_READY. The host can now initiate another PR session.
Figure 62. Timing Diagram for Late Withdrawal Intel® Arria® 10 PR Session
Note: The PR host can withdraw the request any time before the PR controller asserts PR_READY. Therefore, the PR host must not return until the PR control block asserts PR_READY. Provide at least 10 PR_CLK cycles after deassertion of PR_REQUEST, before requesting a new PR session.