AN 872: Thermal and Power Guidelines: For Intel® Programmable Acceleration Card with Intel® Arria® 10 GX FPGA

Download PDF
ID 683795
Date 8/30/2019
Public
Document Table of Contents
Document Table of Contents x
1. Introduction 2. Using the Board Management Controller 3. AFU Design Power Verification 4. Document Revision History for Thermal and Power Guidelines for Intel PAC with Intel Arria 10 GX FPGA
1. Introduction x
1.1. About this Document 1.2. Power Specification 1.3. Prerequisites 1.4. Tools Requirements
2. Using the Board Management Controller x
2.1. Auto-Shutdown 2.2. Recovering After Auto-Shutdown 2.3. Monitor On-Board Sensors Using OPAE 2.4. Monitor On-Board Sensors Using BWMonitor
3. AFU Design Power Verification x
3.1. Power Measurement Flow 3.2. Measuring the Total Board Power 3.3. Measuring the Real Static Power 3.4. Estimating the Worst Case Core Static Power
3.3. Measuring the Real Static Power x
3.3.1. Using the Intel® Quartus® Prime Programmer
1. Introduction
2. Using the Board Management Controller
3. AFU Design Power Verification
4. Document Revision History for Thermal and Power Guidelines for Intel PAC with Intel Arria 10 GX FPGA

1.4. Tools Requirements

You must have the following tools to estimate and evaluate the power and thermal performance. Intel recommends you to follow the Intel Acceleration Stack Quick Start Guide for Intel Programmable Acceleration Card with Intel Arria 10 GX FPGA for software installation.
Related Information
2 The build_synth directory is created after you compile your AFU.
3 In Acceleration Stack 1.2, the board monitoring is performed over PCIe.
4 Ensure that your OEM has validated the targeted PCIe slot(s) in accordance to the Platform Qualification Guidelines for your Intel® FPGA PAC.
Level Two Title