Visible to Intel only — GUID: hys1476842071551
Ixiasoft
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel® Stratix® 10 Devices
2. HDMI 2.1 Design Example (Support FRL = 1)
3. HDMI 2.0 Design Example
4. HDCP Over HDMI 2.0/2.1 Design Example
5. HDMI Intel® Stratix® 10 FPGA IP Design Example User Guide Archives
6. Document Revision History for the HDMI Intel® Stratix® 10 FPGA IP Design Example User Guide
2.1. HDMI 2.1 RX-TX Retransmit Design Block Diagram
2.2. Creating RX-Only or TX-Only Designs
2.3. Hardware and Software Requirements
2.4. Directory Structure
2.5. Design Components
2.6. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
2.7. Design Software Flow
2.8. Running the Design in Different FRL Rates
2.9. Clocking Scheme
2.10. Interface Signals
2.11. Design RTL Parameters
2.12. Hardware Setup
2.13. Simulation Testbench
2.14. Design Limitations
2.15. Debugging Features
3.1. HDMI RX-TX Retransmit Design Block Diagram
3.2. Creating TX or RX Only Designs
3.3. Design Components
3.4. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
3.5. Clocking Scheme
3.6. Interface Signals
3.7. Design RTL Parameters
3.8. Hardware Setup
3.9. Simulation Testbench
3.10. Upgrading Your Design
Visible to Intel only — GUID: hys1476842071551
Ixiasoft
3.1. HDMI RX-TX Retransmit Design Block Diagram
The HDMI RX-TX retransmit design example demonstrates parallel loopback on simplex channel mode for HDMI Intel® FPGA IP.
Figure 22. HDMI RX-TX Retransmit Block Diagram