eCPRI Intel® FPGA IP User Guide

Download PDF
ID 683685
Date 11/11/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Introduction 2. Getting Started 3. IP Parameters 4. Functional Description 5. Interface Overview 6. Registers 7. eCPRI Intel FPGA IP User Guide Archives 8. Document Revision History for eCPRI Intel® FPGA IP User Guide
1. Introduction x
1.1. Supported Features 1.2. Device Family Support 1.3. eCPRI Intel® FPGA IP Device Speed Grade Support 1.4. Resource Utilization 1.5. Intel® FPGA IP Core Verification 1.6. Release Information
2. Getting Started x
2.1. Installing and Licensing 2.2. Specifying the IP Core Parameters and Options 2.3. Generated File Structure 2.4. Simulating the IP Core 2.5. Compiling the Full Design and Programming the FPGA
2.2. Specifying the IP Core Parameters and Options x
2.2.1. Reference and System PLL Clock for your IP Design
4. Functional Description x
4.1. Interfaces 4.2. High Level Data Path Flow 4.3. Operation of the eCPRI IP Blocks
4.2. High Level Data Path Flow x
4.2.1. Transmit TX Path 4.2.2. Receive RX Path 4.2.3. Supported Ethernet Variants
4.3. Operation of the eCPRI IP Blocks x
4.3.1. Packet Classifier 4.3.2. Ethernet Header Insertion/Removal 4.3.3. Concatenation/De-concatenation 4.3.4. Header Mapper/De-Mapper 4.3.5. eCPRI IWF Type 0 4.3.6. eCPRI Message 5 Packet Parser 4.3.7. Packet Queue 4.3.8. eCPRI Message Type 4.3.9. Error Handling 4.3.10. RX Throttling
4.3.8. eCPRI Message Type x
4.3.8.1. eCPRI Message Type 0- IQ Data Transfer 4.3.8.2. eCPRI Message Type 1- Bit Sequence Transfer 4.3.8.3. eCPRI Message Type 2- Real Time Control Data 4.3.8.4. eCPRI Message Type 3- Generic Data Transfer 4.3.8.5. eCPRI Message Type 4- Remote Memory Access 4.3.8.6. eCPRI Message Type 5- One-Way Delay Measurement 4.3.8.7. eCPRI Message Type 6- Remote Reset 4.3.8.8. eCPRI Message Type 7- Event Indication 4.3.8.9. eCPRI Message Type 64- 255 Vendor Specific
5. Interface Overview x
5.1. Clock Signals 5.2. Power, Reset, and Firewalls Signals 5.3. TX Time of Day Interface 5.4. RX Time of Day Interface 5.5. Interrupt 5.6. Configuration Avalon-MM Interface 5.7. Ethernet MAC Source Interface 5.8. Ethernet MAC Sink Interface 5.9. External ST Source Interface 5.10. External ST Sink Interface 5.11. eCPRI IP Source Interface 5.12. eCPRI IP Sink Interface 5.13. Miscellaneous Interface Signals 5.14. IWF Type 0 eCPRI Interface 5.15. IWF Type 0 CPRI MAC Interface
5.2. Power, Reset, and Firewalls Signals x
5.2.1. Reset Control and Initialization Flows
5.7. Ethernet MAC Source Interface x
5.7.1. E-tile Hard IP for Ethernet 1588 PTP Signals 5.7.2. 25G Ethernet MAC 1588 PTP Signals 5.7.3. 10G Ethernet MAC 1588 PTP Signals
5.14. IWF Type 0 eCPRI Interface x
5.14.1. IWF Source Interface 5.14.2. IWF Sink Interface
5.15. IWF Type 0 CPRI MAC Interface x
5.15.1. CPRI 32-bit IQ Data TX Interface 5.15.2. CPRI 64-bit IQ Data TX Interface 5.15.3. CPRI 32-bit Ctrl_AxC TX Interface 5.15.4. CPRI 64-bit Ctrl_AxC TX Interface 5.15.5. CPRI 32-bit Vendor Specific TX Interface 5.15.6. CPRI 64-bit Vendor Specific TX Interface 5.15.7. CPRI 32-bit Real-time Vendor Specific TX Interface 5.15.8. CPRI 64-bit Real-time Vendor Specific TX Interface 5.15.9. CPRI Gigabit Media Independent Interface (GMII) 5.15.10. CPRI IP L1 Control and Status Interface
6. Registers x
6.1. eCPRI Version Register 6.2. eCPRI Scratch Register 6.3. eCPRI Common Control Register 6.4. eCPRI Message 5 Control Register 6.5. eCPRI TX Error Message Register 6.6. eCPRI RX Error Message Register 6.7. eCPRI Error Mask Message Register 6.8. eCPRI Error Log Message Register 6.9. eCPRI Error Message 5 Compensation Value 0 Register 6.10. eCPRI Error Message 5 Compensation Value 1 Register 6.11. eCPRI Transport Delay 0 Register 6.12. eCPRI Transport Delay 1 Register 6.13. eCPRI Transport Delay 2 Register 6.14. Ethernet Frame Scratch Register 6.15. Source MAC Address <i> Register, where i= 0, 1 6.16. Destination MAC n Address <i> Register, where n= 0, 1, 2, 3, 4, 5, 6, 7 and i= 0, 1 6.17. VLAN Tag Register <i>, where i= 0, 1, 2, 3, 4, 5, 6, 7 6.18. Ethertype Register 6.19. IPv4 Dw0 Register 6.20. IPv4 Dw1 Register 6.21. IPv4 Dw2 Register 6.22. IPv4 Source Address Register 6.23. IPv4 Destination Address Register 6.24. UDP Dw0 Register 6.25. UDP Port Register 6.26. MAC Packet Type Enable Register 6.27. RX Error Register
1. Introduction
2. Getting Started
3. IP Parameters
4. Functional Description
5. Interface Overview
6. Registers
7. eCPRI Intel FPGA IP User Guide Archives
8. Document Revision History for eCPRI Intel® FPGA IP User Guide

5.7. Ethernet MAC Source Interface

Table 30.  Signals of the 25G Ethernet MAC Avalon-ST Source Interface This section lists port from eCPRI IP to 25G Ethernet MAC. All signals are synchronous to mac_clk_tx.
Signal Name Width (Bits) I/O Direction Description
mac_source_valid 1 Output Indicates Avalon source valid from eCPRI to Ethernet MAC.
mac_source_data DATA_WIDTH 3 Output Indicates Avalon source write data from eCPRI to Ethernet MAC.
mac_source_sop 1 Output Indicates Avalon source start of packet (SOP) from eCPRI to Ethernet MAC. Indicate the beginning of packet.
mac_source_eop 1 Output Avalon source end of packet (EOP) from eCPRI to Ethernet MAC. Indicate the end of packet.
mac_source_empty LOG2(DATA_WIDTH3/8) Output Avalon source empty from eCPRI to Ethernet MAC. Indicates the number of symbols that are empty, that is, do not represent valid data.
mac_source_ready 4 1 Input Avalon source ready driven from Ethernet MAC. Indicate Ethernet MAC can accept data.
mac_source_error 1 Output Avalon source error from eCPRI to Ethernet MAC. A bit mask to mark errors affecting the data being transferred in the current cycle.
3 This is set to 64. This parameter is hidden from user and you can't change it.
4 This signal has READY_LATENCY of 3 clock cycles.
Level Two Title