Intel® Quartus® Prime Pro Edition User Guide: Platform Designer

ID 683609
Date 4/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.7.3.1. Creating IP Presets

To create an IP preset with appropriate parameters and pin assignments for the target board, follow these steps:

  1. In the Platform Designer System View, select the IP that you want to create presets for and view the Presets tab (View > Presets).
  2. In the Presets tab click the New button to define a new IP preset file for the IP. The New Preset dialog box appears.
    Figure 39. Presets Tab


  3. Enter a Preset name, Preset description, and Category. The read-only Board field reflects the project settings. To change the board, click System > System Settings.
    Figure 40. New Preset Dialog Box


  4. On the Parameter Settings tab, enable or disable the appropriate parameters for your target board.
  5. To specify pin location and I/O standard assignments for the preset, click the Pin Assignments tab.
  6. For the exported interfaces, turn on the external_connection checkbox and enter the exported signal name in the Exported Name cell.
  7. Select the appropriate Pin Location and IO Standard for each exported signal. Refer to Defining Preset Pin Assignments.
    Figure 41. Pin Assignments in New Preset Dialog Box


  8. By default, the Preset file setting suggests a .qprs file name based on the Preset name.
  9. Click Save. The new IP preset appears in the Presets tab. Manage presets in the Presets tab, as Viewing, Applying, and Deleting IP Presets describes.
    Figure 42. New pio_led Preset Appears in Presets Tab