8.5.1. Operators and Return Types Supported by the hls_float Data Type
The hls_float data type supports all overloaded math operators and a limited set of the math functions provided by the Intel® HLS Compiler Pro Edition. For some math operators, you can control the precision of the output by using templated versions of the functions.
Supported Math Functions
- Exponential and logarithmic functions 5:
- ln, log2 , log10 , ln(1+x)
- e x , 2 x , 10 x , e x −1
- Power functions5:
- pow, powr, pown
- Trigonometric functions5:
- sin, cos, sincos
- sinpi, cospi
- asin, asinpi, acos, acospit, atan, atanpi, atan2
hls_float<8, 32> myFloat = ...; hls_float<3, 18> myFloat2 = myFloat; // use rounding rules defined by hls_float type hls_float <3, 18>myFloat3 = myFloat.convert_to<3, 18, ihc::fp_config::FP_Round::RZERO>(); // use rounding rules defined in convert_to() function call
To convert between native types (for example, float, double) and hls_float data types, assign to or from the types. Type conversion in an assignment occurs according to the rules in the Default Conversion Rules for hls_float Variables table that follows.
For two hls_float variables in a binary operation, the hls_float variable with the larger exponent bit-width is considered to be the "larger" variable. If the two variables have the same exponent bit width, the variable with the larger mantissa bit-width is considered to be the larger variable. The operands are then unified to the "larger" type before the binary operation occurs.
Native floating point data types and hls_float data types are converted to hls_float data types according to the rules in the Default Conversion Rules for hls_float Variables table that follows.
The Intel® HLS Compiler also provides some operations that leave the precision of input types untouched and provide control over the output precision. For details, see Operations With Explicit Precision Controls.
|Data Type||From hls_float To Data Type||From Data Type To hls_float|
|hls_float with higher representable range||Keep exponent equivalent.
The mantissa is rounded according to the rounding mode of the target hls_float (with the higher representable range).
| +-Inf if the source of the conversion is out of the representable range.
Otherwise, keep exponent equivalent.
The mantissa is rounded according to the rounding mode of the target hls_float (with the smaller representable range).
|float||Convert original hls_float to hls_float<8, 23> with earlier hls_float rule, then bit-cast to float||Bit-cast float to hls_float<8, 23>, and then convert to target hls_float precision using the hls_float to hls_float rules described earlier.|
|double||Convert original hls_float to hls_float<11, 52> with earlier hls_float rule, then bit-cast to double||Bit-cast double to hls_float<11, 52>, and then convert to target hls_float precision using the hls_float to hls_float rules described earlier.|
| long double
|Convert original hls_float to hls_float<15, 63> with earlier hls_float rule, then insert a 1-bit 1 to the MSB of fraction bits to get an approximate equivalent of 80-bit representation of long double||Drop the explicit 1 fraction bit to convert long double to 79-bit hls_float<15, 63>|
| long double
|Same as double||Same as double|
|C++ native integer types||Truncate towards zero
Converting from hls_float that is larger than range of integer type is undefined behavior.
|Round to nearest, tie breaks to even.
If the integer value is too large, the hls_float value saturates to plus infinity.
Operations With Explicit Precision Controls
The Intel® HLS Compiler provides the following operations that leave the precision of input hls_float-type variables untouched and let you control the output precision:
- convert_to<output_exponent_width, output_mantissa_width, rounding_mode>
Use this method to override the rounding mode set for an hls_float variable when you are converting the variable to different precision.
By default, hls_float to hls_float conversions use the rounding mode that you specified when you declared the variable.
- ihc::hls_float< output_exponent_width, output_mantissa_width > ::mul <accuracy_setting], [subnormal_setting]> (hls_float_a, hls_float_b)
Where the optional parameters are defined as follows:
Optional parameter to specify whether input and output number are flushed to zero when carrying out basic binary operations explicitly.
Set this parameter with one of the following values:
Input and output numbers in the subnormal range are preserved.
The target FPGA device must have subnormal support,
Subnormal support might require more FPGA area.
Input or output numbers in the subnormal range are flushed to zero.
With this setting, the Intel® HLS Compiler enables subnormal support only when it is directly supported by the target FPGA device and it does incur any extra FPGA area overhead.
Optional parameter that influences trade-offs between the accuracy of the result due to different rounding decisions in the intermediary calculations and the FPGA area utilized by the generated hardware. Floating-point operations with less accurate results typically use fewer logic elements.
For example, a divider with a high accuracy might use 20% more FPGA area than divider with low accuracy. The low accuracy divider has a higher error bound [1 unit of least precision (ULP)] than a high accuracy divider (0.5 ULP).Set this parameter with one of the following values:
This math function supplements the basic multiplication operation performed by the multiplication (*) operator.
Multiplies hls_float_a and flaot_b without changing the input types, and outputs an hls_float at the specified precision.
- ihc::hls_float< output_exponent_width, output_mantissa_width > ::add <[optional parameters]> (hls_float_a, hls_float_b)
ihc::hls_float< output_exponent_width, output_mantissa_width > ::sub <[optional parameters]> (hls_float_a, hls_float_b)
ihc::hls_float< output_exponent_width, output_mantissa_width > ::div <[optional parameters]> (hls_float_a, hls_float_b)
These math functions supplement the basic math operations performed by the addition/subtraction/division (+/ −//) operators.
Adds/Subtracts/Divides hls_float_a and hls_float_b by first casting hls_float_a and hls_float_b to the specified hls_floatprecision. The operation and output are at the specified precision.
You can also specify the optional parameters that are the accuracy_setting and subnormal_setting parameters described earlier.
Comparison operators (>, <, ==, !=, >=, <=) are subject to the conversion rules described earlier.
The == and != operators impose a bit-wise comparison of the casted values.
Comparisons with NaN always return false.
Additional hls_float Functions
|Getters and Setters|
|Gets/sets the exponent value of the hls_float variable.|
|Gets/sets the mantissa value of the hls_float variable.|
|Gets/sets the sign bit of the hls_float variable.|
|hls_float<e,m>::nan()||Constant used to assign the hls_float variable a value of NaN.|
|hls_float<e,m>::pos_inf()||Constant used to assign the hls_float variable a value of +∞.|
|hls_float<e,m>::neg_inf()||Constant used to assign the hls_float variable a value of −∞.|
|hls_float::is_nan()||Returns true if the value of the hls_float variable is NaN.|
|hls_float::is_inf()||Returns true if the value of the hls_float variable is ±∞.|
|hls_float::is_zero()||Returns true if the value of the hls_float variable is zero.|
|hls_float::next_after(next_val)||Returns the next representable value towards next_val.|
Did you find the information on this page useful?