Visible to Intel only — GUID: mwh1452708865974
Ixiasoft
System Synchronous Input
The following figure shows a typical chip-to-chip input interface and the various parameters necessary to specify an input delay for the interface.
Figure 12. Simple Chip-to-Chip Input Interface
System Synchronous Input Constraints
#specify the maximum external clock delay from the external device
set CLKs_max 0.200
#specify the minimum external clock delay from the external device
set CLKs_min 0.100
#specify the maximum external clock delay to the FPGA
set CLKd_max 0.200
#specify the minimum external clock delay to the FPGA
set CLKd_min 0.100
#specify the maximum clock-to-out of the external device
set tCO_max 0.525
#specify the minimum clock-to-out of the external device
set tCO_min 0.415
#specify the maximum board delay
set BD_max 0.180
#specify the minimum board delay
set BD_min 0.120
#create a clock 10ns
create_clock -period 10 -name sys_clk [get_ports sys_clk]
#create the associated virtual input clock
create_clock -period 10 -name virt_sys_clk
#create the input maximum delay for the data input to the FPGA that #accounts for all delays specified
set_input_delay -clock virt_sys_clk \
-max [expr $CLKs_max + $tCO_max + $BD_max - $CLKd_min] \
[get_ports {data_in[*]}]
#create the input minimum delay for the data input to the FPGA that #accounts for all delays specified
set_input_delay -clock virt_sys_clk \
-min [expr $CLKs_min + $tCO_min + $BD_min - $CLKd_max] \
[get_ports {data_in[*]}]