MIPI DSI-2 IP User Guide

Download PDF
ID 869461
Date 11/21/2025
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. Quick Start Guide 3. Configuring and Generating the IP 4. Integrating the MIPI DSI-2 IP With Your Application 5. Synthesizing the IP 6. Simulating the IP 7. Appendix A: Functional Description 8. Appendix B: Registers 9. Document Revision History for the MIPI DSI-2 IP User Guide
1. Overview x
1.1. About the MIPI DSI-2 IP 1.2. About the Document 1.3. Applicable Applications 1.4. Key Concepts 1.5. IP Design Flow
1.1. About the MIPI DSI-2 IP x
1.1.1. IP Release Information 1.1.2. IP Features 1.1.3. IP High-level Block Diagram 1.1.4. Licensing the IP 1.1.5. Device Family Support 1.1.6. Device Speed Grade Support 1.1.7. IP Resource Utilization
1.2. About the Document x
1.2.1. Target Audience 1.2.2. Conventions Used in the Document 1.2.3. Acronyms 1.2.4. Reference Documents and Training
1.5. IP Design Flow x
1.5.1. System Level Block Diagram
2. Quick Start Guide x
2.1. Synthesizing the Design Example 2.2. Simulating the Design Example
3. Configuring and Generating the IP x
3.1. Configuring the Quartus® Prime Pro Edition Project 3.2. Configuring the MIPI DSI-2 IP 3.3. Generating HDL for Synthesis and Simulation 3.4. Generating the Design Example 3.5. Compiling the Design Example
3.2. Configuring the MIPI DSI-2 IP x
3.2.1. Configuring the MIPI DSI-2 IP Parameters
3.2.1. Configuring the MIPI DSI-2 IP Parameters x
3.2.1.1. IP Tab Options 3.2.1.2. Video Timing Tab Options 3.2.1.3. Design Example Tab Options
3.2.1.2. Video Timing Tab Options x
3.2.1.2.1. Configuration Requirements 3.2.1.2.2. Timing Calculation Examples
3.3. Generating HDL for Synthesis and Simulation x
3.3.1. Generated File Structure
3.4. Generating the Design Example x
3.4.1. Generated Directory Structure and Files
4. Integrating the MIPI DSI-2 IP With Your Application x
4.1. High-Level Interface Types 4.2. Dependent/Supporting IPs 4.3. Implementing Required Clocking 4.4. Implementing Required Resets 4.5. Connecting the Video Input Interface 4.6. Connecting the MIPI PHY-Protocol Interface 4.7. Connecting the Control Interface
4.1. High-Level Interface Types x
4.1.1. Transmitter Input Video Interface Signals 4.1.2. Transmitter PHY-Protocol Interface (PPI) Signals 4.1.3. Avalon Memory-Mapped Interface Control Signals 4.1.4. Additional Control Signals
4.3. Implementing Required Clocking x
4.3.1. MIPI PPI Clocks 4.3.2. Video Input Clock 4.3.3. Control Interface Clock
6. Simulating the IP x
6.1. Design Example Simulation Features 6.2. Design Example Components 6.3. Supported Simulation EDA Tools 6.4. Simulating the Design Example
8. Appendix B: Registers x
8.1. MIPI DSI-2 IP Base Registers 8.2. CVO and Video Timing Generator Registers
8.2. CVO and Video Timing Generator Registers x
8.2.1. Register Map for IP version 1.0.0 8.2.2. Register Map for IP version 2.0.0
1. Overview
2. Quick Start Guide
3. Configuring and Generating the IP
4. Integrating the MIPI DSI-2 IP With Your Application
5. Synthesizing the IP
6. Simulating the IP
7. Appendix A: Functional Description
8. Appendix B: Registers
9. Document Revision History for the MIPI DSI-2 IP User Guide

8.1. MIPI DSI-2 IP Base Registers

The following 32-bit status registers are accessible when the Control and Status Registers (CSRs) option is enabled. Addresses are given as byte offsets from the base address of the MIPI DSI-2 instance. When accessed using 32-bit word addresses, these offsets should be divided by four.

Table 29.   MIPI DSI-2 IP Base Register Map
Address Register Name Access Default Bits Description
0x00 LANES RO 0x02 3:0 Data lanes configured in IP.
0x04 PIXELS_IN_PARALLEL RO 0x02 3:0 Pixels in parallel configured in IP.
0x08 DATA_TYPE

RO

 0x3E 5:0 MIPI DSI-2 video data type value configured in IP.
0x0C FRAME_WIDTH_PIXELS RO 0x0080 15:0 Frame width (pixels per video line) configured in IP.
0x10 BYTES_PER_LANE RO 0x02 4:0 PPI width in bytes configured in IP.
0x14 FEATURE_ENABLE RO 0x03 1 ECC insertion configured in IP, 1 = enabled.
0 CRC insertion configured in IP, 1 = enabled.
0x18 FRAME_COUNT RO 0x00 31:0 Counter incremented on each video frame start sent.
0x1C LINE_COUNT RO 0x00 31:0 Counter incremented on each video line start sent.
0x20 PIXEL_COUNT RO 0x00 31:0 Counter incremented on each video pixel sent.
0x24 COLLISION RO 0x00 1:0 Internal collision detection. If either of these bits is set then an internal fault has occurred.
Level Two Title