Intel® Quartus® Prime Pro Edition User Guide: Partial Reconfiguration

ID 683834
Date 7/31/2023
Public
Document Table of Contents
Give Feedback

3.3.9. PR Control Block Signals

The following table lists the partial reconfiguration control block interface signals for the Partial Reconfiguration Controller Intel® Arria® 10 /Cyclone 10 FPGA IP:
Table 31.  PR Control Block Interface Signals
Signal Width Direction Description
pr_data [31:0] Input

Carries the configuration bitstream.

pr_done 1 Output Indicates that the PR process is complete.
pr_ready 1 Output Indicates that the control block is ready to accept PR data from the control logic.
pr_error 1 Output Indicates a partial reconfiguration error.
pr_request 1 Input Indicates that the PR process is ready to begin.
corectl 1 Input

Determines whether you are performing the partial reconfiguration internally, or through pins.

Note:
  • You can specify a configuration width of 8, 16, or 32 bits, but the interface always uses 32 pins.
  • All the inputs and outputs are asynchronous to the PR clock (clk), except data signal. data signal is synchronous to clk signal.
  • PR clock must be free-running.
  • data signal must be 0 while waiting for ready signal.