AN 757: 1G/2.5G Ethernet Design Examples

ID 683753
Date 11/12/2018
Public

Using the Simulator

To simulate the design example using the ModelSim simulator, follow these steps:

  1. Ensure that the QUARTUS_ROOTDIR environment variable points to the Intel® Quartus® Prime installation path.
  2. Change the working directory to <project directory>/simulation/ed_sim/mentor.
  3. Launch the ModelSim simulator.
  4. Run the following command to set up the required libraries, compile the functional simulation model, and exercise the simulation model with the provided testbench:

    do tb_run.tcl

Did you find the information on this page useful?

Characters remaining:

Feedback Message