ASMI Parallel II Intel® FPGA IP User Guide
|Intel® Quartus® Prime Design Suite 18.0|
|IP Version 18.0|
Other than the features supported by the ASMI Parallel Intel® FPGA IP, the ASMI Parallel II Intel® FPGA IP additionally supports:
- Direct flash access (write/read) through the Avalon® memory-mapped interface.
- Control register for other operations through the control status register (CSR) interface in the Avalon® memory-mapped interface.
- Translate the generic commands from the Avalon® memory-mapped interface into device command codes.
The ASMI Parallel II Intel® FPGA IP is available for all Intel FPGA device families including the Intel® MAX® 10 devices which are using the GPIO mode.
The ASMI Parallel II Intel® FPGA IP only supports the EPCQ, EPCQ-L, and EPCQ-A devices. If you are using third-party flash devices, you must use the Generic Serial Flash Interface Intel® FPGA IP.
Did you find the information on this page useful?