Nios II Classic Software Developer’s Handbook

ID 683282
Date 5/14/2015
Public
Document Table of Contents

2.11.3.1. Specifying the Memory Device Information in the Advanced Tab

Specify the memory device information in the Advanced tab of the Add Memory Device dialog box. Settings in this tab control makefile variables in mem_init.mk.

On the Advanced tab, you can control the following memory characteristics:

  • The physical memory width.
  • The device's name in the hardware system.
  • The memory initialization file parameter name. Every memory device can have an HDL parameter specifying the name of the initialization file. The Nios II ModelSim launch configuration overrides the HDL parameter to specify the memory initialization filename. When available, this method is preferred for setting the memory initialization filename.
  • The Mem init filename parameter can be used in Nios II systems as an alternative method of specifying the memory initialization filename. The Mem init filename parameter directly overrides any filename specified in the HDL.
  • Connectivity to processor master ports. These parameters are used when creating the linker script.
  • The memory type: volatile, CFI flash or EPCS flash.
  • Byte lanes.
  • You can also enable and disable generation of the following memory initialization file types:
    • .hex file
    • .dat and .sym files
    • .flash file