Nios II Classic Software Developer’s Handbook

ID 683282
Date 5/14/2015
Public
Document Table of Contents

2.1.5. Configuring the FPGA

Before you can run your software, you must ensure that the correct hardware design is running on the FPGA. To configure the FPGA, you use the Programmer.

In the Windows operating system, you start the Programmer from the Nios II SBT for Eclipse, through the Nios II menu. In the Linux operating system, you start Quartus Prime Programmer from the software.

The project directory for your hardware design contains an SRAM Object File (.sof) along with the .sopcinfo file. The .sof file contains the hardware design to be programmed in the FPGA.