HDMI Intel® Arria 10 FPGA IP Design Example User Guide

ID 683156
Date 12/27/2022
Document Table of Contents Key Programmer

To program the encrypted HDCP production keys onto the EEPROM, follow these steps:

  1. Copy the key programmer design files from the following path to your working directory: <IP Root Directory>/hdcp2x/hw_demo/key_programmer/<Device Family Name>
  2. Copy the software header file (hdcp_key<Number>.h) generated from the KEYENC software utility (section Encrypt Single Key for Single EEPROM ) to the software/key_programmer_src/ directory and rename it as hdcp_key.h.
  3. Run ./runall.tcl. This script executes the following commands:
    • Generate IP catalog files
    • Generate the Platform Designer system
    • Create an Intel® Quartus® Prime project
    • Create a software workspace and build the software
    • Perform a full compilation
  4. Download the Software Object File (.sof) to the FPGA to program the encrypted HDCP production keys onto the EEPROM.
Generate the Stratix 10 HDMI RX-TX Retransmit design example with Support HDCP 2.3 and Support HDCP 1.4 parameters turned on, then follow the following step to include the HDCP protection key.

Did you find the information on this page useful?

Characters remaining:

Feedback Message