Visible to Intel only — GUID: vcp1559099630677
Ixiasoft
Visible to Intel only — GUID: vcp1559099630677
Ixiasoft
4.3.5.1. Push Buttons and LED Functions
Push Button/LED | Functions |
---|---|
cpu_resetn | Press once to perform system reset. |
user_pb[0] | Press once to toggle the HPD signal to the standard HDMI source. |
user_pb[1] |
|
user_pb[2] |
|
user_led[0] |
RX HDMI PLL lock status.
|
user_led[1] |
RX HDMI core lock status
|
user_led[2] |
RX HDCP1x IP decryption status.
|
user_led[3] |
RX HDCP2x IP decryption status.
|
user_led[4] |
TX HDMI PLL lock status.
|
user_led[5] |
TX transceiver PLL lock status.
|
user_led[6] |
TX HDCP1x IP encryption status.
|
user_led[7] |
TX HDCP2x IP encryption status.
|
Push Button/LED | Functions | |
---|---|---|
cpu_resetn | Press once to perform system reset. | |
user_dipsw | User-defined DIP switch to toggle the passthrough mode.
Refer to Running the Design in Different FRL Rates for more information about setting the different FRL rates. |
|
user_pb[0] | Press once to toggle the HPD signal to the standard HDMI source. | |
user_pb[1] | Reserved. | |
user_pb[2] | Press once to read the SCDC registers from the sink connected to the TX of the Bitec HDMI 2.1 FMC daughter card.
Note: To enable read, you must set DEBUG_MODE to 1 in the software.
|
|
user_led_g[0] | RX FRL clock PLL lock status.
|
|
user_led_g[1] | RX HDMI video lock status.
|
|
user_led_g[2] | RX HDCP1x IP decryption status.
|
|
user_led_g[3] | RX HDCP2x IP decryption status.
|
|
user_led_g[4] | TX FRL clock PLL lock status.
|
|
user_led_g[5] | TX HDMI video lock status.
|
|
user_led_g[6] | TX HDCP1x IP encryption status.
|
|
user_led_g[7] |
TX HDCP2x IP encryption status.
|
Did you find the information on this page useful?
Feedback Message
Characters remaining: