HDMI Intel® Arria® 10 FPGA IP Design Example User Guide

Download PDF
ID 683156
Date 1/26/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel® Arria® 10 Devices 2. HDMI 2.1 Design Example (Support FRL = 1) 3. HDMI 2.0 Design Example (Support FRL = 0) 4. HDCP Over HDMI 2.0/2.1 Design Example 5. HDMI Intel® Arria® 10 FPGA IP Design Example User Guide Archives 6. Revision History for HDMI Intel® Arria® 10 FPGA IP Design Example User Guide
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel® Arria® 10 Devices x
1.1. Generating the Design 1.2. Simulating the Design 1.3. Compiling and Testing the Design 1.4. HDMI Intel® FPGA IP Design Example Parameters
2. HDMI 2.1 Design Example (Support FRL = 1) x
2.1. HDMI 2.1 RX-TX Retransmit Design Block Diagram 2.2. Creating RX-Only or TX-Only Designs 2.3. Hardware and Software Requirements 2.4. Directory Structure 2.5. Design Components 2.6. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering 2.7. Design Software Flow 2.8. Running the Design in Different FRL Rates 2.9. Clocking Scheme 2.10. Interface Signals 2.11. Design RTL Parameters 2.12. Hardware Setup 2.13. Simulation Testbench 2.14. Design Limitations 2.15. Debugging Features 2.16. Upgrading Your Design
2.5. Design Components x
2.5.1. HDMI TX Components 2.5.2. HDMI RX Components 2.5.3. Top-Level Common Blocks
2.15. Debugging Features x
2.15.1. Software Debugging Message 2.15.2. SCDC Information from the Sink Connected to TX 2.15.3. Clock Frequency Measurement
3. HDMI 2.0 Design Example (Support FRL = 0) x
3.1. HDMI 2.0 RX-TX Retransmit Design Block Diagram 3.2. Hardware and Software Requirements 3.3. Directory Structure 3.4. Design Components 3.5. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering 3.6. Clocking Scheme 3.7. Interface Signals 3.8. Design RTL Parameters 3.9. Hardware Setup 3.10. Simulation Testbench 3.11. Upgrading Your Design
4. HDCP Over HDMI 2.0/2.1 Design Example x
4.1. High-bandwidth Digital Content Protection (HDCP) 4.2. Nios II Processor Software Flow 4.3. Design Walkthrough 4.4. Protection of Encryption Key Embedded in FPGA Design 4.5. Security Considerations 4.6. Debug Guidelines
4.1. High-bandwidth Digital Content Protection (HDCP) x
4.1.1. HDCP Over HDMI Design Example Architecture
4.3. Design Walkthrough x
4.3.1. Set Up the Hardware 4.3.2. Generate the Design 4.3.3. Include HDCP Production Keys 4.3.4. Compile the Design 4.3.5. View the Results
4.3.3. Include HDCP Production Keys x
4.3.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) 4.3.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1)
4.3.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) x
4.3.3.1.1. HDCP Key Mapping from DCP Key Files 4.3.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 4.3.3.1.3. hdcp2x_rx_kmem.v file 4.3.3.1.4. hdcp2x_tx_kmem.v file
4.3.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1) x
4.3.3.2.1. Intel KEYENC 4.3.3.2.2. Key Programmer
4.3.5. View the Results x
4.3.5.1. Push Buttons and LED Functions
4.6. Debug Guidelines x
4.6.1. HDCP Status Signals 4.6.2. Modifying HDCP Software Parameters 4.6.3. Frequently Asked Questions (FAQ)
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel® Arria® 10 Devices
2. HDMI 2.1 Design Example (Support FRL = 1)
3. HDMI 2.0 Design Example (Support FRL = 0)
4. HDCP Over HDMI 2.0/2.1 Design Example
5. HDMI Intel® Arria® 10 FPGA IP Design Example User Guide Archives
6. Revision History for HDMI Intel® Arria® 10 FPGA IP Design Example User Guide

4.3.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files

For hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files
  • These two files are sharing the same format.
  • To identify the correct HDCP1 TX DCP key file for hdcp1x_tx_kmem.v, make sure the first 4 bytes of the file are “0x01, 0x00, 0x00, 0x00”.
  • To identify the correct HDCP1 RX DCP key file for hdcp1x_rx_kmem.v, make sure the first 4 bytes of the file are “0x02, 0x00, 0x00, 0x00”.
  • The keys in the DCP key files are in little-endian format. To use in kmem files, you must convert them into big-endian.
Figure 34. Byte mapping from HDCP1 TX DCP key file into hdcp1x_tx_kmem.v

This figure shows the exact byte mapping from HDCP1 TX DCP key file into hdcp1x_tx_kmem.v. The same mapping applies to hdcp1x_rx_kmem.v.

Note: The byte number displays in below format:
  • Key size in bytes * key number + byte number in current row + constant offset + row size in bytes * row number.
  • 308*n indicates that each key set has 308 bytes.
  • 7*y indicates that each row has 7 bytes.
Figure 35. HDCP1 TX DCP key file filling with junk values
Figure 36. Wire Arrays of hdcp1x_tx_kmem.v

Example of hdcp1x_tx_kmem.v and how its wire arrays map to the example of HDCP1 TX DCP key file in Figure 35.

Level Two Title