Visible to Intel only — GUID: ckp1575595793147
Ixiasoft
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel® Arria® 10 Devices
2. HDMI 2.1 Design Example (Support FRL = 1)
3. HDMI 2.0 Design Example (Support FRL = 0)
4. HDCP Over HDMI 2.0/2.1 Design Example
5. HDMI Intel® Arria® 10 FPGA IP Design Example User Guide Archives
6. Revision History for HDMI Intel® Arria® 10 FPGA IP Design Example User Guide
2.1. HDMI 2.1 RX-TX Retransmit Design Block Diagram
2.2. Creating RX-Only or TX-Only Designs
2.3. Hardware and Software Requirements
2.4. Directory Structure
2.5. Design Components
2.6. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
2.7. Design Software Flow
2.8. Running the Design in Different FRL Rates
2.9. Clocking Scheme
2.10. Interface Signals
2.11. Design RTL Parameters
2.12. Hardware Setup
2.13. Simulation Testbench
2.14. Design Limitations
2.15. Debugging Features
2.16. Upgrading Your Design
3.1. HDMI 2.0 RX-TX Retransmit Design Block Diagram
3.2. Hardware and Software Requirements
3.3. Directory Structure
3.4. Design Components
3.5. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
3.6. Clocking Scheme
3.7. Interface Signals
3.8. Design RTL Parameters
3.9. Hardware Setup
3.10. Simulation Testbench
3.11. Upgrading Your Design
Visible to Intel only — GUID: ckp1575595793147
Ixiasoft
2.3. Hardware and Software Requirements
Intel uses the following hardware and software to test the design example.
Hardware
- Intel® Arria® 10 GX FPGA Development Kit
- HDMI 2.1 Source (Quantum Data 980 48G Generator)
- HDMI 2.1 Sink (Quantum Data 980 48G Analyzer)
- Bitec HDMI FMC 2.1 daughter card (Revision 9)
- HDMI 2.1 Category 3 cables (tested with Belkin 48Gbps HDMI 2.1 Cable)
Software
- Intel® Quartus® Prime Pro Edition software version 20.1