Build and Install the Sampling Drivers for Linux* Targets
Prerequisites for remote Linux target systems: You need root access to the target system.
Prerequisites for all Linux systems: Sampling driver sources. You can find the sampling driver sources for the local system in the <install_dir>/sepdk folder of your VTune Profiler installation. For remote targets, locate the target packages for the desired system in the <install_dir>/target folder of your installation, copy the package to the target system, extract it, and build the driver.
Install Drivers on Linux* Host Systems
During product installation on a host Linux OS, you may control the drivers installation options via the Advanced Options. VTune Profiler provides the following options:
Use This Option
To Do This
Sampling driver install type [build driver (default) / driver kit files only ]
Choose the driver installation option. By default, VTune Profiler uses the Sampling Driver Kit to build the driver for your kernel. You may change the option to driver kit files only if you want to build the driver manually after installation.
Driver access group [ vtune (default) ]
Set the driver access group ownership to determine which set of users can perform the collection on the system. By default, the group is vtune. Access to this group is not restricted. To restrict access, see the Driver permissions option below. You may set your own group during installation in the Advanced options or change it manually after installation by executing: ./boot-script -–group <your_group> from the <install-dir>/sepdk/src directory.
Driver permissions [ 660 (default) ]
Change permissions for the driver. By default, only a vtune group user can access the driver. Using this access the user can profile the system, an application, or attach to a process.
Load driver [ yes (default) ]
Load the driver into the kernel.
Install boot script [ yes (default) ]
Use a boot script that loads the driver into the kernel each time the system is rebooted. The boot script can be disabled later by executing: ./boot-script --uninstall from the <install-dir>/sepdk/src directory.
Enable per-user collection mode [no (default) / yes]
Install the hardware event-based collector driver with the per-user filtering on. When the filtering is on, the collector gathers data only for the processes spawned by the user who started the collection. When it is off (default), samples from all processes on the system are collected. Consider using the filtering to isolate the collection from other users on a cluster for security reasons. The administrator/root can change the filtering mode by rebuilding/restarting the driver at any time. A regular user cannot change the mode after the product is installed.
For MPI application analysis on a Linux* cluster, you may enable the Per-user Hardware Event-based Sampling mode when installing the Intel Parallel Studio XE Cluster Edition. This option ensures that during the collection the VTune Profiler collects data only for the current user. Once enabled by the administrator during the installation, this mode cannot be turned off by a regular user, which is intentional to preclude individual users from observing the performance data over the whole node including activities of other users.
After installation, you can use the respective vars.sh files to set up the appropriate environment (PATH, MANPATH) in the current terminal session.
Driver build options …
Specify the location of the kernel header files on this system, the path and name of the C compiler to use for building the driver, the path and name of the make command to use for building the driver.
Check Sampling Driver Installation
To verify that the sampling driver is installed correctly on the host Linux system:
Check whether the sampling drivers are installed:
$ cd <install-dir>/sepdk/src
$ ./insmod-sep -q
This provides information on whether the drivers are currently loaded and, if so, what the group ownership and file permissions are on the driver devices.
Check group permissions.
If drivers are loaded, but you are not a member of the group listed in the query output, request your system administrator to add you to the group. By default, the driver access group is vtune. To check which groups you belong to, type groups at the command line. This is only required if the permissions are other than 666.
If there is no collection in progress, there is no execution time overhead of having the driver loaded and very little overhead for memory usage. You can let the system module be automatically loaded at boot time (for example, via the install-boot-script script, used by default). Unless the data is being collected by the VTune Profiler, there will be no latency impact on the system performance.
Verify Kernel Configuration
To verify kernel configuration:
Make sure that the kernel header sources are present on your host system. The kernel version should be 2.6.28 or later. To find the kernel version, explore kernel-src-dir/include/linux/utsrelease.h, or, depending on the kernel version: kernel-src-dir/include/generated/utsrelease.h. For more details, see the README.txt file in the sepdk/src directory.
Make sure the following options are enabled in the kernel configuration for hardware event-based sampling (EBS) collection:
CONFIG_PROFILING=y(kernel versions 5.16 or older)
CONFIG_TRACEPOINTS=y (required for kernel versions 5.17 and newer; recommended for all other versions)
CONFIG_KPROBES=y(kernel versions 5.17 and newer)
In addition to the options above, make sure the following options are enabled in the kernel configuration for EBS collection with stacks:
CONFIG_FRAME_POINTER=y (optional but recommended for Call Stack Mode)
For remote target systems, determine if signed kernel modules are required (CONFIG_MODULE_SIG_FORCE=y). If they are, you must have the signed key that matches your target system.
If you are building the sampling drivers from a fresh kernel source and want to use it for an existing target system, get the original key files and sign the sampling driver with the original key. Alternatively, build the new kernel and flash it to the target device so the target device uses your kernel build.
Build the Sampling Driver
You need kernel header sources and other additional software to build and load the kernel drivers on Linux. Refer to the Verify kernel configuration section.
To cross-build drivers for a remote target Linux system, extract the package from the <install-dir>/target folder to <extract_dir>.
If the current version of the sampling driver that is shipped with the VTune Profiler installation does not suit your needs, for example, due to a recent change in the Linux* kernel, you can find the latest version of the sampling driver on the Sampling Driver Downloads page.
To build the driver if it is missing:
Change the directory to locate the build script:
To build drivers for a local system: $ cd <install-dir>/sepdk/src
To cross-build drivers for a remote target system: $ cd <extract-dir>/sepdk/src
Use the build-driver script to build the drivers for your kernel. For example:
The script prompts the build option default for your local system.
$ ./build-driver -ni
The script builds the driver for your local system with default options without prompting for your input.
$ ./build-driver -ni -pu
The script builds the driver with the per-user event-based sampling collection enabled, without prompting for your input.
$ ./build-driver -ni \
The script builds the drivers with a specified cross-compiler for a specific kernel version. This is usually used for the cross-build for a remote target system on the current host. This example uses the following options:
-ni disables the interactive during the build.
--c-compiler specifies the cross build compiler. The compiler should be available from the PATH environment. If the option is not specified, the host GCC compiler is used for the build.
--kernel-version specifies the kernel version of the target system. It should match the uname -r output of your target system and the UTS_RELEASE in kernel-src-dir/include/generated/utsrelease.h or kernel-src-dir/include/linux/utsrelease.h, depending on your kernel version.
--kernel-src-dir specifies the kernel source directory.
--make-args specifies the build arguments. For a 32-bit target system, use PLATFORM=x32. For a 64-bit target system, use PLATFORM=x32_64
--install-dir specifies the path to a writable directory where the drivers and scripts are copied after the build succeeds.
Use ./build-driver -h to get the detailed help message on the script usage.
To build the sampling driver as RPM using build services such as Open Build Service (OBS):
Use the sepdk.spec file located at the <install-dir>/sepdk/src directory.
Install the Sampling Drivers
Prerequisites for remote target systems: Copy the sepdk/src folder or the folder specified by the --install-dir option when building the driver to the target system using ssh, ftp, adb, sdb, or other supported means.
To install the drivers:
If building the drivers succeeds, install them manually with the insmod-sep script:
$ cd <install_dir>/sepdk/src
$ ./insmod-sep -r -g <group>
where <group> is the group of users that have access to the driver.
To install the driver that is built with the per-user event-based sampling collection on, use the -pu (-per-user) option as follows:
$ ./insmod-sep -g <group> -pu
If you are running on a resource-restricted environment, add the -re option as follows:
$ ./insmod-sep -re
Enable the Linux system to automatically load the drivers at boot time:
$ cd <install_dir>/sepdk/src
$ ./boot-script --install -g <group>
The -g <group> option is only required if you want to override the group specified when the driver was built.
To remove the driver on a Linux system, run: