AN 776: UHD HDMI 2.0 Video Format Conversion Design Example

ID 683465
Date 4/15/2021
Public
Document Table of Contents

2.3. Setting up the Intel® Arria® 10 FPGA development board

To run the UHD Video Format Conversion Design Example:
  1. Fit the Bitec HDMI 2.0 FMC card to the Intel® Arria® 10 GX FPGA development board using FMC Port A.
  2. Ensure the power switch (SW1) is turned off, then connect the power connector.
  3. Connect a USB Blaster II download cable to your computer and to the MicroUSB Connector (J3) on the Intel® Arria® 10 GX FPGA development board.
  4. Attach a HDMI 2.0 cable between the HDMI video source and the Rx port of the Bitec HDMI 2.0 FMC card and ensure the source is active.
  5. Attach a HDMI 2.0 cable between the HDMI display and the Tx port of the Bitec HDMI 2.0 FMC card and ensure the display is active.
  6. Turn on board using SW1.

Did you find the information on this page useful?

Characters remaining:

Feedback Message