IOPLL IP Core Parameters - Dynamic Reconfiguration Tab
|Enable dynamic reconfiguration of PLL||Turn on or Turn off||Turn on the enable the dynamic reconfiguration of this PLL (in conjunction with PLL Reconfig Intel® FPGA IP core).|
|Enable access to dynamic phase shift ports||Turn on or Turn off||Turn on the enable the dynamic phase shift interface with the PLL.|
|MIF Generation Option 3||Generate New MIF File, Add Configuration to Existing MIF File, and Create MIF File during IP Generation||Either create a new .mif file containing the current configuration of the I/O PLL, or add this configuration to an existing .mif file. You can use this .mif file during dynamic reconfiguration to reconfigure the I/O PLL to its current settings.|
|Path to New MIF file 4||—||Enter the location and file name of the new .mif file to be created.|
|Path to Existing MIF file 5||—||Enter the location and file name of the existing .mif file you intend to add to.|
|Enable Dynamic Phase Shift for MIF Streaming 3||Turn on or Turn off||Turn on to store dynamic phase shift properties for PLL reconfiguration.|
|DPS Counter Selection 6||C0–C8, All C, or M||Selects the counter to undergo dynamic phase shift. M is the feedback counter and C is the post-scale counters.|
|Number of Dynamic Phase Shifts 6||1–7||Selects the number of phase shift increments. The size of a single phase shift increment is equal to 1/8 of the VCO period. The default value is 1.|
|Dynamic Phase Shift Direction 6||Positive or Negative||Determines the dynamic phase shift direction to store into the PLL MIF.|
3 This parameter is only available when Enable dynamic reconfiguration of PLL is turned on.
4 This parameter is only available when Generate New MIF File is selected as MIF Generation Option.
5 This parameter is only available when Add Configuration to Existing MIF File is selected as MIF Generation Option.
6 This parameter is only available when Enable Dynamic Phase Shift for MIF Streaming is turned on.