Intel Agilex® 7 SEU Mitigation User Guide

ID 683128
Date 4/10/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.6.1. Launching and Setting Up the Fault Injection Debugger

Before you begin, set up the SEU mitigation features to enable error detection and fault injection.

To use the Fault Injection Debugger tool, connect it to the device through the JTAG interface and configure the JTAG chain.

  1. From the Intel® Quartus® Prime main menu, select Tools > Fault Injection Debugger.
  2. In the Programmer Fault Injection Debugger window, click Hardware Setup.
    The Hardware Setup windows displays the programming hardware connected to your computer.
  3. Select the programming hardware you want to use.
  4. Click Close.
  5. In the Programmer Fault Injection Debugger window, click Auto Detect.
The Auto Detect command populates the device chain with the programmable devices found in the JTAG chain.